M20 flywheel and clutch
Moderator: martauto
-
VW-will
- E30 Zone Regular
- Posts: 369
- Joined: Sun Apr 25, 2010 11:00 pm
Hi guys, been reading I can use a m20 flywheel and clutch, I'd want to keep the STD 328box though what else would I need/have to do? Thanks
-
Jimbob
- E30 Zone Addict
- Posts: 3731
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Poole
According to the sticky thread you can, I assume because of that you will need the E36 prop and a low ratio diff too.
-
penton08
- E30 Zone Camper
- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
M20 clutch, flywheel and starter motor. Either the flywheel needs some material removing from the back or the sump needs a bit of grinder action.
-
VW-will
- E30 Zone Regular
- Posts: 369
- Joined: Sun Apr 25, 2010 11:00 pm
Just tried my clutch and the spline is different too that of my 325 e30 one ? So it doesn't fit on the 328 zf box
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Its not what you think it is in that case
-
penton08
- E30 Zone Camper
- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
VW-will wrote:Just tried my clutch and the spline is different too that of my 325 e30 one ? So it doesn't fit on the 328 zf box
Either your clutch is wrong or your doing something very strange!-
VW-will
- E30 Zone Regular
- Posts: 369
- Joined: Sun Apr 25, 2010 11:00 pm
Clutch come out of my e30 325, was sat on my bench and it won't go over the spline of the e36 box... I'll have a closer look tomorrow 