Seat differences??
Moderator: martauto
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
I've just rebuilt my driver's seat using new material and a diffferent base. Everything looks good but after fitting it I've discovered that the bar to adjust the back/forward position of the seat is completely different from the original. It kinks sharply to the left as you look down on it, meaning it is positioned directly under the fire extinguisher and can't be used
. I've done a few seats before and have never seen this. I'd prefer to try and fit the original adjuster bar than put all the foam/cloth on to a different base but I can't see how it can be done. Anyone shed some light on this??
-
jonny323i
- Engaged to the E30 Zone

- Posts: 5428
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: Stoke on trent
any chance of a pic mate and i will check it against mine as they will come out of the car in the next day or so
Touring for life
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
jonny323i
- Engaged to the E30 Zone

- Posts: 5428
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: Stoke on trent

thats the underside of the old passenger side frame i had left over until i get the other seats out i can only pressume the drivers side is the same but opposite hand
Touring for life
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
jonny323i
- Engaged to the E30 Zone

- Posts: 5428
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: Stoke on trent
that is a big difference.
It shouldnt be too difficult to remove the entire runner and change it over
It shouldnt be too difficult to remove the entire runner and change it over
Touring for life
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet


