Auto to manual

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
bimanut
E30 Zone Camper
E30 Zone Camper
Posts: 1194
Joined: Thu Oct 30, 2008 11:00 pm
Location: Warrington

Post Sat Dec 31, 2011 11:40 am

Is it a relatively easy process to convert a 325 auto car into a 318 manual or is there little pit falls i need to know about?

I know i`ll have to change diff,prop,front springs,loom and ecu but not sure about whats involved with the pedal box.
Image
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sat Dec 31, 2011 12:04 pm

This needs cleaning up, but all the info should be there...

http://www.e30zone.net/e30zonewiki/inde ... _To_Manual
User avatar
bimanut
E30 Zone Camper
E30 Zone Camper
Posts: 1194
Joined: Thu Oct 30, 2008 11:00 pm
Location: Warrington

Post Sat Dec 31, 2011 12:38 pm

Thanks.
Looks pretty straight forward,it was the pedal box etc i wasnt sure of.
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 31, 2011 2:23 pm

The actual pedal box is the same. The clutch pedal and longer shaft can be fitted to you existing box, and the brake pedal changed, but most people just change the whole thing.
User avatar
E30SPORTMAD
E30 Zone Regular
E30 Zone Regular
Posts: 305
Joined: Sat May 28, 2011 11:00 pm
Location: N.Ireland/UK

Post Sat Dec 31, 2011 10:49 pm

Have a complete manual pedal box if need be? :cool:
User avatar
fixedwheelnut
E30 Zone Regular
E30 Zone Regular
Posts: 909
Joined: Sun Nov 20, 2005 11:00 pm
Location: South East London

Post Sun Jan 01, 2012 5:12 pm

Don't forget the spigot bearing in the end of the crankshaft, Auto's don't have one but the manual will need it.
User avatar
E30SPORTMAD
E30 Zone Regular
E30 Zone Regular
Posts: 305
Joined: Sat May 28, 2011 11:00 pm
Location: N.Ireland/UK

Post Sun Jan 01, 2012 6:44 pm

fixedwheelnut wrote:Don't forget the spigot bearing in the end of the crankshaft, Auto's don't have one but the manual will need it.
Have these bearings brand new here also :D