iv tested the ews and it knows the chip is there, there is resistence between pin 1 and 3. i also have voltage at pin4 from the ecu which i wired from pin 18 of the ecu.
i also have 8v at the coil plugs, is this correct
when i turn the key before it cranks the relays click, both in the 52 loom and one in the main fuse box. i can hear a buzzing noise coming from the injecter area of the engine but i cant find what it is. there is a 2 pin plug that i cant find a home for that is cliped to the engine mount and goes up to the inlet yellow/green and white/blue are the colours.
fuel pump doesnt work either and my electric windows are live all the time
iv wired it as
c101 m52 loom
1 - 25
4 12
5 - 23
6 - 22
7 - 21
8 - 24
9 - 20
11 - 19
13 - 13
15 -15
18 - 18
pin 6 has 2 wires to the same pin so i joined them together to pin 22 is this correct
any ideas on what to test or spoted somthing iv done wrong would be greatly appreciated
