Front suspension ball joints

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
FEP
E30 Zone Regular
E30 Zone Regular
Posts: 309
Joined: Sat May 24, 2008 11:00 pm
Location: Hackney (of carriage fame) London

Post Wed Dec 28, 2011 1:27 am

Am I right in thinking that if either ball joint is donald ducked then I need to buy a replacement wishbone - that you cannot buy the ball joints and get them pressed into the old wishbone?
TouringTash
E30 Zone Team Member
E30 Zone Team Member
Posts: 3803
Joined: Mon Jun 28, 2010 11:00 pm
Location: Kent

Post Wed Dec 28, 2011 6:52 am

whole wishbone fella.
May as well take the plunge and grab 2 along with some M3 excentric bushes as well.
The money would only be wasted on you getting wasted on NYE. best mod you can do on an E30
318i Touring
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Dec 28, 2011 8:19 am

Sure you can buy replacement balljoints - its only the Alloy arms on the Tourings that can't have the balljoints pressed out ( not that most Tourings are still on their original alloy arms )

If its just the balljoint thats knackered they're only a few quid whereas a new lemforder arm is about £50 ( comes with the 2 x balljoints ) - but then you're also into the realms of spending £40 on new lollipop bushes plus getting the old ones pressed out/new ones pressed in etc.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
TouringTash
E30 Zone Team Member
E30 Zone Team Member
Posts: 3803
Joined: Mon Jun 28, 2010 11:00 pm
Location: Kent

Post Wed Dec 28, 2011 9:26 am

Go with Robs advice as once again a so called BMW specialist has told me a pack of lies.
Thanks for the correct info Rob.
318i Touring
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Dec 28, 2011 9:55 am

Tool that is needed to swap a balljoint costs around £100.
Balljoints are about £10 each.
Complete decent quality wishbone is about £50.
Pair of M3 type eccentric bushes about £25.

Do not attempt to fit new balljoints to an M3 alloy wishbone,dealer only at about £150.
Youth is wasted on the young.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 28, 2011 10:13 am

daimlerman wrote:Tool that is needed to swap a balljoint costs around £100.
4lb lump hammers are expensive in your neck of the woods, Malc.
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Dec 28, 2011 10:23 am

Genuine BMW M3 Eccentrics are just under £40 a pair now with discount - I bought some about 6 months ago.

lemforder balljoints and complete arms available via our Zone ECP contact meatballs82

Malc I'm sure the genuine Alloy wishbones are a lot more than £150 a side - IIRC when I enquired about genuine alloy arms for the Touring they were over £250 and that was nearly a Year ago :eek:

Personally I'd buy the balljoint(s), get the arm off, and take it to a local garage and offer them a pint to press out the old joint and put the new one in :wink:
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Dec 28, 2011 10:25 am

Brianmoooore wrote:
daimlerman wrote:Tool that is needed to swap a balljoint costs around £100.
4lb lump hammers are expensive in your neck of the woods, Malc.
Although I an an advocate of using a bigger hammer....

http://cgi.ebay.co.uk/ball-joint-remove ... 24&afsrc=1

This is the correct tool for the job.
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Wed Dec 28, 2011 10:28 am

daimlerman wrote:
Brianmoooore wrote:
daimlerman wrote:Tool that is needed to swap a balljoint costs around £100.
4lb lump hammers are expensive in your neck of the woods, Malc.
a hammer is the correct tool for every job.

fixed for you Malc
Image
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Dec 28, 2011 10:36 am

mrLEE30 wrote:
daimlerman wrote:
Brianmoooore wrote: 4lb lump hammers are expensive in your neck of the woods, Malc.
a hammer is the correct tool for every job.

fixed for you Malc
It is this type of behavour,FROM A TEAM MEMBER,that I so dislike about this forum at the moment.
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Wed Dec 28, 2011 10:46 am

Lighten up Malc, anyone with a brain cell can see it was meant in jest.
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Wed Dec 28, 2011 11:39 am

have you ever eaten here Malc? it's very nice i hear :

Image
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Wed Dec 28, 2011 2:48 pm

daimlerman wrote: It is this type of behavour,FROM A TEAM MEMBER,that I so dislike about this forum at the moment.
Are you really serious?

Speaking as a long time E30 zoner, nothing to do with the team, as i am surely allowed to do, unless perfroming disipliniary measures, i find your reply personally quite childish if not also meant in jest.

So its either meant in jest, or its the end of the matter as far as i am concerned - unless you want to complain about my behaviour then please go ahead.
Image
User avatar
FEP
E30 Zone Regular
E30 Zone Regular
Posts: 309
Joined: Sat May 24, 2008 11:00 pm
Location: Hackney (of carriage fame) London

Post Thu Dec 29, 2011 1:55 pm

Thanks. Now located the ball joints at ECP.

Malc - don't worry, these are for my Tech 1.

Couple of people have said that the Lemforder wishbones are £50. What am I doing wrong? Basic ones are £58.20 and Lemforders are £76.80.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Dec 29, 2011 2:18 pm

FEP wrote:Thanks. Now located the ball joints at ECP.

Malc - don't worry, these are for my Tech 1.

Couple of people have said that the Lemforder wishbones are £50. What am I doing wrong? Basic ones are £58.20 and Lemforders are £76.80.
With Lemforder's at that price,buy the tool and get stuck in!

I have replaced the wishbones complete on my cars,then discovered the correct tool for the job,but calculated that I would need to swap three balljoints to reach breakeven...with decent wishbones at FEP's quoted price this does change things.

I do use a big hammer,but I have never found one works for me when dealing with ball joints,I split 'em with a scissor type tool.



And MrLee,please keep your clever wisecracks to the proper parts of the forum!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Dec 29, 2011 2:19 pm

Nearly always around 25% discount available at ECP, which brings it back nearer the £50 mark.
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Thu Dec 29, 2011 5:41 pm

Yep - I bought Lemforder arms earlier this year and they were £50 a pop via the zone ECP contact - free delivery as well when you spend over £100 in one go.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite