LSD bearings/seals

Need technical Q/A then you're in the right place

Moderator: martauto

mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Tue Dec 20, 2011 11:08 pm

anyone know of a source to get a LSD rebuild kit? or will it be a case of getting bearings here.. seals there.. etc

thanks in advance :wink:
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield

Post Tue Dec 20, 2011 11:33 pm

gareth on used to do it for a fee but i don't know if he's been on in a while.
start a thred in the FAO section/search his username & see if there is the option to email him.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Wed Dec 21, 2011 10:12 am

maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Wed Dec 21, 2011 10:17 am

BMW still sell the seals and bearings etc
Image
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Wed Dec 21, 2011 4:11 pm

ok thanks, didnt want to go direct to bmw as they will rip my arse out on price, the seals i would use oe but the bearings dont have to come from bmw
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Wed Dec 21, 2011 4:14 pm

also is there a way to test the lsd lock? ive heard about jacking one wheel off the ground and see if its able to be turned but never tried to test the unit..
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Wed Dec 21, 2011 4:18 pm

mrb27 wrote:also is there a way to test the lsd lock? ive heard about jacking one wheel off the ground and see if its able to be turned but never tried to test the unit..
You use a torque wrench on a wheel bolt with one wheel in the air, iirc it should be around 80Nm before it slips.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Wed Dec 21, 2011 6:06 pm

oh, great :D ill try it once its built... should prob have tested it before it came off the car :o:
though the diffs been in the boot of my winter car for 8 months anyway
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Wed Dec 21, 2011 7:22 pm

I think you can get the ramp angles changed for more percentage lock up
Reshimming I think it's called.
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Wed Dec 21, 2011 11:51 pm

yh im not sure i want to open the lsd unit, ive done diff before so the service, bearing/seal change is no problem but i dont know what to expect when i open the lsd unit itself..
is there any benifit to opening the unit guys? does it get clogged?
i did read somwhere about going over the plates with sandpaper to rough them up for more grip but that was old pub talk :mad:
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 30, 2011 9:45 am

Still here and still doing LSD rebuilds :)

PM me if you want to chat :thumb:
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details