Rocker Cover Gasket Sealent Yes or No?

Need technical Q/A then you're in the right place

Moderator: martauto

Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Tue Dec 20, 2011 11:21 am

Should be refitting the rocker cover tomorrow with the new OEM gasket and D shape bung.

Should I use some gasket sealent? I have cleaned up the cover and the head where they join to get a nice flat surface.

It was leaking a little oil from here before removed so want to get a good tight seal.
User avatar
greg124
E30 Zone Regular
E30 Zone Regular
Posts: 668
Joined: Tue Apr 03, 2007 11:00 pm
Location: In the pub

Post Tue Dec 20, 2011 2:03 pm

I have read somewhere on the zone that "real engineers" use only a smear of grease.
Personally, I didn't use anything when fitting a new rocker cover gasket to an M40 engine, and it doesn't leak.
Schadenfreude - the German's haven't got a word for that.
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Tue Dec 20, 2011 2:15 pm

no from me.

Torque it down and check it again after a week or two of driving.
Image
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Tue Dec 20, 2011 2:21 pm

PS. Its a M20 if that makes any difference.
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Tue Dec 20, 2011 2:30 pm

greg124 wrote:I have read somewhere on the zone that "real engineers" use only a smear of grease.
Personally, I didn't use anything when fitting a new rocker cover gasket to an M40 engine, and it doesn't leak.
Was not the grease for the Sump gasket :?:
Though i s'pose if it works there......then again you are more likely
to remove the Rocker cover than your Sump.
Image
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Tue Dec 20, 2011 2:39 pm

Grease the sump gasket to stop it drying out which is when it stop sealing and starts leaking.
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 20, 2011 2:57 pm

Put the cover on without the gasket first, insert a strip of the thinnest paper you can find between the two, and check that it is gripped by the weight of the cover all the way around.
If it passes this test, the gasket can be fitted dry.
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Tue Dec 20, 2011 3:13 pm

Thanks Brian
User avatar
greg124
E30 Zone Regular
E30 Zone Regular
Posts: 668
Joined: Tue Apr 03, 2007 11:00 pm
Location: In the pub

Post Tue Dec 20, 2011 10:26 pm

thanks for setting me right gooner & Sanchez - half remembered 'facts' can be a dangerous thing
Schadenfreude - the German's haven't got a word for that.
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Dec 21, 2011 8:39 am

Last one I fitted I used a genuine gasket with a very light smear of grease after cleaning both surfaces first. Didnt leak :thumb:
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite