325i Flooding and not starting

Need technical Q/A then you're in the right place

Moderator: martauto

maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Mon Dec 19, 2011 3:27 pm

I have a 325i here that doesn't start well.

The car is getting spark and fuel.

The problem is that it's overfuelling a lot. I can get the car running by unplugging the fuel pump fuse and pushing it in and out.

I've tested the temp sender and got 9000ohms when it was cold which sounds about right? Although I'm sure that wouldn't stop it starting anyway.

I've removed the injectors and they are all squirting fine, not stuck open.

Not sure what else could cause it to overfuel like it does?

Any help is appreciated :)
Image
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Mon Dec 19, 2011 3:49 pm

When cold the temp sensor should be more like 2K to 3K Ohms so at 9K its way over, the car must think its in siberia.

When warm it should be about 350 Ohms
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Mon Dec 19, 2011 4:05 pm

After another test, the coolant temp sensor is showing 3400 Ohms. I need a new multimeter.
Image
User avatar
Prey
E30 Zone Regular
E30 Zone Regular
Posts: 359
Joined: Tue Jun 15, 2010 11:00 pm
Location: M1 J28

Post Mon Dec 19, 2011 4:39 pm

tested the wiring to the sensor?
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Dec 19, 2011 5:07 pm

maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Mon Dec 19, 2011 5:19 pm

Wiring looks fine at the plug, looks like someone has cleaned it recently.
Image
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Dec 19, 2011 5:35 pm

there's no point looking at the wiring, unless you have electron-microscopes for eyes :D

Either get your hands dirty and unclip the C191 to test it, or find the ECU, unplug it and test the Blue Plug from there:

http://www.e30zone.net/e30zonewiki/inde ... ug#Testing

If those tests work out ok, you've either got a duff ECU, a broken air flow meter or some really dribbly injectors; all of which are too expensive to just replace in the hope that it fixes things.