Electric window problem.

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
ah
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Mar 10, 2008 11:00 pm
Location: surrey

Post Sat Dec 17, 2011 6:52 pm

My f/o/s/ window has a fault on it.When it starts to go down,it works fine until it gets approx half way down and then it slows right down until it practically stops.After the half way mark it speeds up again but still slow until it gets to fully open position.Closing the window is the fault in reverse.Anyone got any ideas
Image
Born on the 23 April 1990 320i Alpinweiss ll kabriolett! (SOLD BUT NOT FORGOTTEN !) :cry:
turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Sat Dec 17, 2011 7:01 pm

Got the same problem with mine, the tube the cable runs in is tight in one spot. That's if it's the early type of window mechanism. You can widen the channel but it's time consuming and annoying.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 17, 2011 8:14 pm

turkeysneck wrote:That's if it's the early type of window mechanism
This is the first thing that needs to be established.
User avatar
ah
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Mar 10, 2008 11:00 pm
Location: surrey

Post Sat Dec 17, 2011 8:17 pm

Sorry I would'nt know but the car is a June 1990 320i cab,if thats any help.
Image
Born on the 23 April 1990 320i Alpinweiss ll kabriolett! (SOLD BUT NOT FORGOTTEN !) :cry:
SGP
E30 Zone Regular
E30 Zone Regular
Posts: 502
Joined: Thu Aug 31, 2006 11:00 pm

Post Sun Dec 18, 2011 2:29 am

Must be the early type if it's a chromie ?
If it ain't broke..
Fix it till it is :)
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Sun Dec 18, 2011 7:13 am

look in the wiki guide on adjusting front windows, and rub a little silicone grease inside the rubber window guides.

It could just be misalignment or a sticky window.

If that does not help then take a photo of the mechinism with the plastic sheet pulled back, being a cab and a later one it will likely have the later type widow winding mechanism
Image