hi peeeps (again)
im already tired of the poor mpg of my carb powered m10, ive come across a m20 for sale with loom, ecu, gearbox , rad and header tank cheap! with 80k miles with paperwork.
my question is will this go straight in and work with my m10 prop? it has already got a 5 speed box fitted from a unknown car so im not sure what prop is already on it.
im looking for a relatively easy conversion, engine out, engine in wire, plumb and running.
i know that the m50 is better engine but requires more work which i dont have time to commit to.
Im aware that the exhaust would need changing.
any guide or threads would be helpfull.
ps i promise ill get a progress thread up when progress it made
PEACE!!!
m20b25 to replace m10
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
It is a fairly easy swap to do, but you won't want to keep your prop or diff; the gearing will be all out.
Have a read of the M20 forum; that's where most swaps are documented. It's been covered dozens of times on here. Your biggest headache will be converting your loom plug.
Have a read of the M20 forum; that's where most swaps are documented. It's been covered dozens of times on here. Your biggest headache will be converting your loom plug.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
A lot easier with a whole 325 donor car. swap prop, diff anti roll bars and most importantly brakes. Find a rusty but mechanically sound car is my advice
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Plenty of M10 engined E30s were built with the 20 pin C101. Don't forget the M10 carb. put in an appearance in early facelift guise.Grrrmachine wrote: Your biggest headache will be converting your loom plug.
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
My chromie in the picture had the c101, making conversion a doddle when it came to the electricsBrianmoooore wrote:Plenty of M10 engined E30s were built with the 20 pin C101. Don't forget the M10 carb. put in an appearance in early facelift guise.Grrrmachine wrote: Your biggest headache will be converting your loom plug.
-
P10mike
- E30 Zone Regular

- Posts: 251
- Joined: Fri May 01, 2009 11:00 pm
- Location: fife
I'm sure someone will correct me if i'm wrong but isn't the carbed m10 got a mechanical fuel pump, which will mean an elctrical one will have to be sourced?
Which also means a different tank and a return fuel line?
If its doable though i would go for it as the m10 is woeful.
Which also means a different tank and a return fuel line?
If its doable though i would go for it as the m10 is woeful.
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
I disagree the M10 is a great little engine, but its old technology and cant be compared to modern stuff.
The Tank in the M10 will not have a swirl pot in it but an electric fuel pump fits in and I have had no issues running an m30 like it, the wiring for the pump will be there as well, easy peasy, adding an extra fuel line to the already present brackets will present no problem either.
The Tank in the M10 will not have a swirl pot in it but an electric fuel pump fits in and I have had no issues running an m30 like it, the wiring for the pump will be there as well, easy peasy, adding an extra fuel line to the already present brackets will present no problem either.
-
gazwhittle
- E30 Zone Newbie

- Posts: 181
- Joined: Wed Nov 23, 2011 11:00 pm
Really good info guys I'm now putting a list together of parts Ill need to fit it and to service it.
I'm going to check the loom tomoz where will I find the 20 pin connector in the bay ?
I'm going to check the loom tomoz where will I find the 20 pin connector in the bay ?
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
on the bulkhead, next to the fusebox if it has one
here you go

here you go

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
While we're on the subject of the C101, check out my 'wiring warning' sticky in the engine swaps forum, before you power up a different engine loom in the car.
-
gazwhittle
- E30 Zone Newbie

- Posts: 181
- Joined: Wed Nov 23, 2011 11:00 pm
Beat you to it mate , cheers for the heads up tho dudeBrianmoooore wrote:While we're on the subject of the C101, check out my 'wiring warning' sticky in the engine swaps forum, before you power up a different engine loom in the car.
