car wont start?
Moderator: martauto
-
deanocool
- E30 Zone Regular

- Posts: 451
- Joined: Mon Jan 17, 2011 11:00 pm
- Location: Midlands
drove to work the other day with my M50 absolutely fine. went to start up and the car starts then cuts out almost immediately. if i unplug the maf it ticks over but very rough
ive got a new maf but its still exactly the same, starts then cuts out. cant think what could go so suddenly when it was running smooth a few hours before. crank sensor? any ideas? 
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
massive air leak/split hose?
dead maf sensor?
dead maf sensor?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
deanocool
- E30 Zone Regular

- Posts: 451
- Joined: Mon Jan 17, 2011 11:00 pm
- Location: Midlands
ive changed the maf - no difference. cant see a split hose either. it was fine when i turned it off then it wouldnt start when i was going home. petrol and matches time! 
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
You might try posting in the technical section, that normally works, moved for you.

-
deanocool
- E30 Zone Regular

- Posts: 451
- Joined: Mon Jan 17, 2011 11:00 pm
- Location: Midlands
cheers dude! just sorted it anyway! the large vacuum pipe under the middle 2 inlet pipes had dislodged because the clips are shot. it hadnt come out totally but obviously enough to clonk the vac supply. pushed it back in and bobs your uncle! need to sort out securing it next!

