need to chip my car but its older than the moon! advice!

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Wed Dec 14, 2011 9:11 pm

Hey...ive got a 86 chromie with the m20b20 lump in, its in realy good condition and im not before enyone asks looking for 4000bhp :) but id like to spice it up a little bit, and in the near future im fitting the 2.7eta bottom end onto it. Ive also just got a 2.5 inlet manifold, injectors and Tb which im going to be fitting at the weekend (im porting my head to match the new manifold by the way).

Getting to the point, im new to bmws and after looking into it more, i think im snookered lol. Ive got an ECU with the code 0 208 001 309 on it in i think im rite in beliving this cannot be chipped?

also, is it worthwile using the injectors from the 2,5 on my 2.0? after all it will be getting more air, so surely more fuels a bonus for the old girl? aha

so basicly im asking, how do I go around mapping or chipping my car? im not a cheap skate at all but im not willing to spend a fortune. if some one could shed some light on my dilemma id be much appreciative, thanks!
User avatar
hazd31
E30 Zone Squatter
E30 Zone Squatter
Posts: 1689
Joined: Sat Feb 07, 2009 11:00 pm
Location: west sussex, nr brighton

Post Wed Dec 14, 2011 9:20 pm

I got a speedtouch 325 wild chip fitted into my 320, definatly an improvement, not sure weather its possible on an older car though?
User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Wed Dec 14, 2011 9:36 pm

i dont think it is mate :( id be going for that one too if it was possible. seems ive got the appauling jetronic system, not motronic.
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Wed Dec 14, 2011 9:45 pm

Updating to the later Motronic is the only way at the moment I think... Mines the same, a 87 320i chromie, cant be chipped...
I know 'Kedge' is doing a write up on this at the moment and might be able to help you out a little.

There is a mod to do with where the rocker arm & Dizzy cap sit to get more revs before changing gear... Although I cant remember how!

'Speedtouch' does know though as im sure it was him who mentioned it to me before...
User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Wed Dec 14, 2011 10:10 pm

I think i noticed somewhere before on one of his posts about turning the dizzy slightly to get more revvs, obviously advancing the timing to work better further up in the rev range, but wont this kill low end torque? because your pretty much throwing your timing out lol.....correct me if im wrong! i probably are! :)
Canny Beat a chromie!'
Image
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Thu Dec 15, 2011 9:32 am

dont touch the dizzy !! it will pink really badly.

cant chip jetronic in any way shape or form.
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW
sweep
Married to the E30 Zone
Married to the E30 Zone
Posts: 10110
Joined: Sat Mar 15, 2008 11:00 pm
Location: spares & repairs in sheffield

Post Thu Dec 15, 2011 9:37 am

It needs a high comp 325i engine in it :)