my 89' restomod.

Show off your pride and joy here

Moderator: martauto

Post Reply
User avatar
Vach
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Wed Apr 11, 2007 11:00 pm
Location: burbank, California
Contact:

Mon Dec 12, 2011 8:15 am

Never been much of a poster on here but I've always followed along. Thought I would introduce myself and my car. It started out life as an 89' 325i that i bought from the original owner, who was a 90 pound old lady who really looked after the car. When I first got the car it was flat pink but I knew it was single stage paint so After buffing the crap out of it, out came a nice zinno red e30. Over the few years I have had the car its gone through the normal transformation from a stock 4 wheeler to a decently dropped e30. I started out with an iS lip + rear iS spoiler (looking for a new mtech 1 if anybody has or knows of one) and got the bumpers painted since they were the only thing that was visually unpleasing. After the bumpers i decided it was time for a drop. I opted for the time tested H&R race + bilstein sport combo which I can't complain about. I drove about 6 months with this set up and lightly rear ended a toyota tacoma... completely my fault. i needed a new hood and fender. I opted out for some original bmw parts and got the fender and hood. I thought with this original 20 year old paint there is no way i can match the hood and fender to the rest of the car. So about 2 months ago i put the car into one of the premier bodyshops in the area. DC autocraft. they work on bentleys, audi R8s on a daily basis. I thought if they are good enough for those cars, they're good enough for my e30. The car has been there since May 17th and its almost getting rapped up.

Image

Image

Image

Image

Image

Right before the accident I had purchased some Apex arc-8s and was in the process of getting them mounted for the car. Didn't happen for a while till i got the new hood and fender paid for. After that I got some yokohama parada spec 2's for the wheels because I couldn't wait to get them mounted anymore.

Image

Image

Image

Image

Image

Image

you can see the fender damage in this pics while the car was getting a water pump, fan clutch, and timing belt replaced.

Image

Image

Image

Image



what the car looked like at bimmerfest 2009... and what it looked like before i got into the accident.

I was genuinely pissed off at myself for weeks for doing that to the car. I am glad I am rebuilding to its glory days though.

I don't have any pictures of what happened after the incident since they were on my old phone. But it was only a light hit. I drove around with the hood, fender and wheels for a bout 6 months and here we are today.



before the body work started... i wanted to try my arc-8s with some 8mm spacers in the back. they rubbed pretty hard without even driving the car on 215/40s so i had the fenders rolled before sending her off to the paint shop.

Image

Image

Image

Image

Image

On its way to the body shop... and its slow paint process. It was slow in fact that i missed the whole dent and sanding portion of the photos.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

the car is primed and almost ready for paint.

Image

I also spruced up the Arc-8 a little bit... I absolutely love bbs rc's and the closest i could get were these wheels. I hate they the e30 fitment rc's look compared to say an e36 fitment wheel so I got the arc-8s. I put on some red bbs caps and stickers and recently purchased some bbs lug nuts. I don't care if im a poser I think these will look epic on the car.


Image

and im gonna be putting these lug nuts on.

Image

Also, I have bought every piece of trim, seal, clip, screw imaginable straight from the dealer so i can have a minty fresh e30. I work at the stealership so dont worry too much on the cost.


Image


yes their real... and their spectacular.

Image


The bbs jewelry isn't only for these wheels, will be on bbs in the future. Thanks for the compliments guys, its been a long road. Can't wait till its done!


today's progress... getting the primer sanded down and blocked.

Image

Image

Image

Image



car got masked up and tack clothed for paint.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

its painted!!!!!! sry for the crappy iphone pics but hey its finally painted!!!!
User avatar
djsimmy
E30 Zone Regular
E30 Zone Regular
Posts: 271
Joined: Sat May 22, 2010 11:00 pm

Mon Dec 12, 2011 8:33 am

shaaaaaaaaatinggggggggggggg!

looks lovely mate top work!
mani
E30 Zone Camper
E30 Zone Camper
Posts: 1143
Joined: Mon May 26, 2008 11:00 pm
Location: London

Mon Dec 12, 2011 11:25 am

very nice mate
Alpina99
E30 Zone Camper
E30 Zone Camper
Posts: 1000
Joined: Sat Nov 17, 2007 11:00 pm
Location: Portsmouth

Mon Dec 12, 2011 5:08 pm

Stunning,
Looking forward to seeing it finished,
:D
Gone, but not forgotten !!
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9538
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Mon Dec 12, 2011 5:10 pm

Those wheels look hot! :cool:
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
Kedge
Old Skooler
Old Skooler
Posts: 7702
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Mon Dec 12, 2011 5:15 pm

Good work there!!

Must be ace not having to worry about salty road and rust! :cry:
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Mon Dec 12, 2011 6:45 pm

looking good. keep the updates coming
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
BMWill87
E30 Zone Newbie
E30 Zone Newbie
Posts: 73
Joined: Sun Nov 20, 2011 11:00 pm

Mon Dec 12, 2011 7:46 pm

looks good mate, nice to see someone prepared to go with more modern looking wheels :thumb:
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Mon Dec 12, 2011 8:07 pm

She's looking real nice, keep the updates & pics coming
tonybtonyb
E30 Zone Addict
E30 Zone Addict
Posts: 3580
Joined: Wed Jun 13, 2007 11:00 pm
Location: essex

Mon Dec 12, 2011 8:34 pm

Loooks outstanding mate :cool:
They don't make bm's like this anymore!..They should.
Image
tha881
E30 Zone Regular
E30 Zone Regular
Posts: 780
Joined: Thu Apr 15, 2010 11:00 pm
Location: Kent

Mon Dec 12, 2011 9:38 pm

Vach wrote:they work on bentleys, audi R8s on a daily basis. I thought if they are good enough for those cars, they're good enough for my e30
errr only just i would say!

i like your mentality when it comes to e30!
User avatar
parkin10
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Mon Sep 17, 2007 11:00 pm
Location: south yorkshire

Mon Dec 12, 2011 10:41 pm

good stuff

finished pics?
User avatar
Vach
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Wed Apr 11, 2007 11:00 pm
Location: burbank, California
Contact:

Tue Dec 13, 2011 3:47 am

Image

Image

most recent photo. the car is almost done, just missing a few trims and clips. the car will be going back to the body shop for a few adjustment. after its back i will take it for a proper photoshoot.


Image
User avatar
Vach
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Wed Apr 11, 2007 11:00 pm
Location: burbank, California
Contact:

Tue Dec 13, 2011 3:47 am

glad you guys like the car! thanks for the support!
User avatar
parkin10
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Mon Sep 17, 2007 11:00 pm
Location: south yorkshire

Tue Dec 13, 2011 9:50 pm

sure like those wheels
User avatar
SMALLTHING
E30 Zone Newbie
E30 Zone Newbie
Posts: 38
Joined: Wed Oct 04, 2006 11:00 pm
Location: WHATEVER
Contact:

Wed Dec 14, 2011 12:01 am

GREAT JOB ! LOVING THE WHEELS AND THE PAINT JOB
:D :D :D :D
User avatar
E30isKing
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Tue Nov 15, 2011 11:00 pm

Tue Jan 24, 2012 11:45 pm

Hi there,

Great looking car. I am very interested in those wheels...Where can you find them in Europe? If I order them from the US I will die with import duty.

Thanks,
Paulo

PS. I am from Portugal
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Wed Jan 25, 2012 9:22 am

Good work mate!
Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Wed Jan 25, 2012 9:37 am

ARC-8's are available from the States only..
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Post Reply