Removing Injectors

Need technical Q/A then you're in the right place

Moderator: martauto

Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Wed Dec 07, 2011 9:37 pm

Can anyone explain rthe best method of removing the injectors? At the moment I have the rocker cover off as the gaskets leaking and it seems that theres more access to the injectors.

Or is it a take of taking the manifold off?

As far as I know they have never been done so thought while the cars off the road anyway should get them done.
Black_Potato
E30 Zone Regular
E30 Zone Regular
Posts: 774
Joined: Thu Nov 22, 2007 11:00 pm
Location: Colchester

Post Wed Dec 07, 2011 11:45 pm

which engine ?
3x S14 Rightness....
Image
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Thu Dec 08, 2011 9:26 am

Sorry, keep forgetting that when posting M20 325 auto.
User avatar
lamby
E30 Zone Regular
E30 Zone Regular
Posts: 251
Joined: Wed Jan 27, 2010 11:00 pm

Post Thu Dec 08, 2011 10:12 am

unclip the brown/blue sensor plugs/undo plug under manifold,twist type,undo the four nuts,10 m/m.undo fuel feed and fpr feed.undo fpr nuts 2 off(you may not have to undo them but...)then prise up with a screwdriver on the rail gently at one end then the other end etc etc and they pull out towards you over the rocker cover.if you have a 90 onwards you will have to unclip the injector bar that runs all the way along housing the wiring to each injector,then you can see the four bolts better that hold the rail on.no need to remove manifold.easier with rocker cover off.
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Thu Dec 08, 2011 12:27 pm

Thanks lamby, will try and have a bash at this tonight.