Fooked Drivers Lock

Need technical Q/A then you're in the right place

Moderator: martauto

Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Wed Dec 07, 2011 9:34 pm

Finally got round to having a look at why the drivers door wont lock. It looks like its been a problem in the past and some eejit removed all the central locking actuators :twisted:

Anyway I think the lock barrel is buggered. I have read that you can buy a lock repair kit to fix some things but will it fix the problem below.

Pictures are of the barrel in the locked position.

Image

Image

Uploaded with ImageShack.us
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 07, 2011 10:16 pm

There's a fair bit of wear in the L shaped piece (which is part of the kit).
What else am I supposed to see, or am I being thick?
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Wed Dec 07, 2011 10:21 pm

it's an option to remove the tumblers, inspect them and presuming they're fine, rehome them in a known good barrel. I haven't done this, but it can't be an excessively difficult a job
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Thu Dec 08, 2011 5:27 am

Rtaylor2208 wrote:Finally got round to having a look at why the drivers door wont lock. It looks like its been a problem in the past and some eejit removed all the central locking actuators :twisted:



Image

Image

Uploaded with ImageShack.us
Would the Lock not still work with the actuators removed, just not the Central Locking part. :?:
Image
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Thu Dec 08, 2011 9:25 am

When turning the lock it goes so far then the arm bit seems to get to a point where it flips open like the 2nd picture above.

It manages to push the lever inside the door up to unlock but not down to lock (think thats the right way round).
Bristol_Jer
E30 Zone Addict
E30 Zone Addict
Posts: 2523
Joined: Thu Sep 24, 2009 11:00 pm
Location: Bristol, UK

Post Thu Dec 08, 2011 10:11 am

Rtaylor2208 wrote:When turning the lock it goes so far then the arm bit seems to get to a point where it flips open like the 2nd picture above.

It manages to push the lever inside the door up to unlock but not down to lock (think thats the right way round).
Mine does exactly the same thing as this, I usually lock and unlock the car from the boot lock!
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Thu Dec 08, 2011 12:25 pm

No central locking to unlock from the boot unfortunatly, loads of central locking parts missing as some previous fud of an owner removed them all.
powelly
E30 Zone Squatter
E30 Zone Squatter
Posts: 1649
Joined: Wed Dec 06, 2006 11:00 pm
Location: On the scrap heap

Post Thu Dec 08, 2011 12:50 pm

I'll bet if you strip that down the L shaped bit is broken.
Image Le Mans Classic 2006
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Thu Dec 08, 2011 1:27 pm

Thanks powelly, I'll stip it down following the wiki before buying a repair kit.