how long to do the rear end bushes

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
randomspeedfreak
E30 Zone Regular
E30 Zone Regular
Posts: 992
Joined: Mon Mar 15, 2010 11:00 pm
Location: Bristol

Post Tue Dec 06, 2011 12:33 am

how long has it taken time wise for you boys to change trailing arm and rear beam bushes?

start to finish and best method?

cheers,
Matt
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Tue Dec 06, 2011 4:53 am

Takes a while.. I have just done mine on a spare rear end I have waiting to go in.

Trailing arms the best I got was 10 mins... The other took around 25 mins each


First thing I did was cut off the rubber protruding from the trailing arms then
I got a gas torch that you get from the hardware shop and heated up the metal tube inside the bush, I got it so hot that the rubber began to smoke a sizzle, the hit it with a hammer pushing the tube out the other side.. Grabbed hold of the tube with vise grips and twisted it out.. The rubber then just pushes out.



Beam bushes I used a press, no other way that I could see possible.. I heated up the metal tube holding the bush evenly till I heard a sizzle (not red hot and even heat all sides) then pressed the bush out.

Took about 5 mins per side and I used a oxy.


Trailing arm bushes were real messy
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Dec 06, 2011 8:10 am

Depends whether it all comes apart ok.

IF you have access to all the tools you will need including a hydraulic press AND it all comes apart without anything breaking ( unlikely ) you can probably do it in a day.

What you need to be prepared for is :

Rusty brake pipes/knackered flexis that need to be cut/replaced
Exhaust hanger bolts that shear off requiring new hangers
Rear beam bushes where the metal inner welds itself into the body of the car needing to be drilled out

And thats just to get the bloody beam off.

Doing this job yourself is OK if :

1) you have another car to use to go and fetch parts and don't need the thing back together quickly
2 ) you have ALL the tools - and especially access to a hydraulic press
3 ) you have a 4 post lift
4 ) Its summer
5 ) You have somewhere to work where you can leave the car in pieces ( i.e not on the road in front of your house )

Good luck :D
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Dec 06, 2011 8:58 am

As rob says, your about 6 months to late to be doing this job! :)
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue Dec 06, 2011 12:19 pm

1.5 days in a BMW workshop on a ramp.. Nearly killed me to do it in that time also. So much was seized, luckily I had ordered EVERY last nut and bolt new also.

Would not be tackling it in this weather/temp outside! Fuck that.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
randomspeedfreak
E30 Zone Regular
E30 Zone Regular
Posts: 992
Joined: Mon Mar 15, 2010 11:00 pm
Location: Bristol

Post Tue Dec 06, 2011 12:35 pm

i cant hack my rear end with those bushes, especially now the m52 is in! its was trying to kill me and that was just with the 316 motor!

cheers for the advice lads, i do have a garage that i rent, ill probably have a crack when i have more time over christmas

BBBBRRRRRRRRRRRRRRRRRR
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Dec 06, 2011 1:00 pm

Get some bush fillers then and enjoy a tightened rear end until the weather comes back :wink:
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Tue Dec 06, 2011 1:01 pm

I'll be doing this task too, and I'll be documenting it all for the Wiki so if you can wait a week or too I'll talk you through it.
User avatar
randomspeedfreak
E30 Zone Regular
E30 Zone Regular
Posts: 992
Joined: Mon Mar 15, 2010 11:00 pm
Location: Bristol

Post Tue Dec 06, 2011 1:39 pm

ill just man through the wobble until then, then! :)
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue Dec 06, 2011 1:39 pm

DanThe wrote:Get some bush fillers then and enjoy a tightened rear end until the weather comes back :wink:
This!
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
andyp
True Old Skooler
Posts: 6899
Joined: Sun Jan 09, 2005 11:00 pm
Location: LONDON

Post Tue Dec 06, 2011 2:12 pm

a normal person at home, this will take most of a day
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Dec 06, 2011 6:40 pm

This takes 10 minutes a side :wink:

Image

Image