sagging rear

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jimbob29
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Tue Apr 26, 2011 11:00 pm
Location: isle of wight

Post Thu Dec 01, 2011 10:55 am

ive noticed lately that the rear of my saloon is lower than usual?cars been lowered 35mm front and rear.shocks are standard but showing ther age and springs are 3 months old.thers no knocking from rear and feels normall.could worn drop links or subfram bushes cause slight sagging or is it an illusion because the rear arches are lower than the front :mad:
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Dec 01, 2011 12:03 pm

Measure it side to side rather than front to back. It would be odd for both sides of the rear suspension to develop a fault at the same time.

Also, how are your top mounts? There's been lots of stories recently about them being knackered because people forget to fit the support plate, so they tear within a week.
TouringMatt
E30 Zone Camper
E30 Zone Camper
Posts: 1188
Joined: Mon Jan 10, 2005 11:00 pm
Location: Not where i should be

Post Fri Dec 02, 2011 11:35 pm

Springs do settle in, mine looked spot on for a few weeks then slowly settled.

Could be worn subframe bushes, if everything is good then you can put some thicker spring pads in to bring it back up a touch, but i'd check your subframe bushes first.
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sat Dec 03, 2011 9:42 am

Knackerd sub frame bushes can drop the rear end by about 10mm
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Sat Dec 03, 2011 2:29 pm

^ this, and also if you park on a slope the twin cable handbrake with no equaliser can pull one brake more than the other, leading to one doing all the work and sagging or lifting that side.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&