335i running rich and white smoke!! help!!!
Moderator: martauto
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
just wondering if anybody could point me in the right direction.
i bought a m30 3.5 engined e30 couple of months ago and i hardly ever drive it. when i got it it felt ok but was running a little bit rich.
its been sat up for few weeks because i wasnt getting home from work til 8. had flat battery so i jumped it and noticed abit of white smoke from exhaust. I got alternator refurbed and now when i start it up its like a james bond car from all the white smoke and smells very rich!! its really bad.
ive got a feeling its the headgasket but it has never got hot since ive had it (temp gauge is constantly in middle and the elec fan is on as soon as i turn ignition). and it dosent use any water or oil....
im was wondering could it be something to do with it running rich??
im not a mechanic but am ok with a spanner i suppose, ive changed steering racks, coilovers and gearboxs etc.. but im abit worried about taking the head off if i dont have to as it seems involved tbh lol.
so its...
running very rich,
heavy white smoke,
dont use water or oil.......
thanks shane
i bought a m30 3.5 engined e30 couple of months ago and i hardly ever drive it. when i got it it felt ok but was running a little bit rich.
its been sat up for few weeks because i wasnt getting home from work til 8. had flat battery so i jumped it and noticed abit of white smoke from exhaust. I got alternator refurbed and now when i start it up its like a james bond car from all the white smoke and smells very rich!! its really bad.
ive got a feeling its the headgasket but it has never got hot since ive had it (temp gauge is constantly in middle and the elec fan is on as soon as i turn ignition). and it dosent use any water or oil....
im was wondering could it be something to do with it running rich??
im not a mechanic but am ok with a spanner i suppose, ive changed steering racks, coilovers and gearboxs etc.. but im abit worried about taking the head off if i dont have to as it seems involved tbh lol.
so its...
running very rich,
heavy white smoke,
dont use water or oil.......
thanks shane
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Probably a mixture issue rather than the head. No idea where to start on a 3.5 but on the M20 the usual things to check are:
1. Blue Temp Sensor resistance
2. Throttle Position Sensor is working
3. Idle Control Valve is working
4. AFM is working Correctly
5. Injectors are working correctly.
Hopefully someone else on here with a good knowledge of the engine can be more specific.
1. Blue Temp Sensor resistance
2. Throttle Position Sensor is working
3. Idle Control Valve is working
4. AFM is working Correctly
5. Injectors are working correctly.
Hopefully someone else on here with a good knowledge of the engine can be more specific.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
White smoke normally indicates Water
As above really, check the above.
Also, the fan should not kick in when you start the car, it should be on a temp switch and come in about 80 C
As above really, check the above.
Also, the fan should not kick in when you start the car, it should be on a temp switch and come in about 80 C

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
this time of year M20 and M30's tend to steam a bit from the exhaust, what's it like when it's up to normal running temp ?
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
Sounds silly but in this cold weather are you sure its not moisture in the exhaust and its not smoke its actually loads of steam? mine puts plumes of the stuff out every cold morning until its warmed up. (awaiting steam/boat/anchor/m30 comments from the usual suspects)
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
Too slow 
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
..thats how it was when i bought the car. asoon as you turn on ignition fan fires up.Rav335uk wrote: Also, the fan should not kick in when you start the car, it should be on a temp switch and come in about 80 C
its not moisture had it running for 15 mins earlier and contant smoke. also had trouble starting it today and when i was turning it over backfired a few times and when it was running it was very lumpy..
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
fan isnt running off the switch
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
If the engine is in Pos 3, then it'll be a pain to get the head off as it will be nearly touching the bulkhead.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
yeah i was thinking that. i dont know if its pos 2 or 3 tbh. got a feeling its 2 though because the dizzy caps about 5mm from the rad lol. ill have a propa look at weekend at it.
by the way im the boy with the red 2dr with white cage and white alpina reps i camped at pod at the bmw show.
by the way im the boy with the red 2dr with white cage and white alpina reps i camped at pod at the bmw show.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Tec 2 kit too???
It sounds like it's in pos 3 by what you've described above, only way I see is to lift the engine out.
It sounds like it's in pos 3 by what you've described above, only way I see is to lift the engine out.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
There's nothing in what you have described so far that suggests head gasket to me. What makes you think it is?
Does it still run OK when up to operating temp?
Does it still run OK when up to operating temp?
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
Is it loosing coolant water?

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
shanehaward wrote: and it dosent use any water or oil....
dont use water or oil.......
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
started it the other day and was very smokey, sweet smelling and lumpy.. went to start it yesterday and took a couple of mins to start it ( kept turning over then back firing then cutting out straight away!!) finally got it started and was very rough and smokey.Brianmoooore wrote:There's nothing in what you have described so far that suggests head gasket to me. What makes you think it is?
Does it still run OK when up to operating temp?
going to get my dad to come and have a look on weekend because hes got a much better idea than me lol
i will check the temp sensors etc before i try and pull the head off though.
ive been thinking today that if it is the worst case i will stick a 3.0 cam in, get head skimmed 1mm and ported and polished, and speedtouch chip, make engine and bay look pretty etc..
wont be till after xmas though (got to try to look on the bright side i suppose
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
no wasnt tec 2.. was a 320i was parked next to magpie...Rav335uk wrote:Tec 2 kit too???
It sounds like it's in pos 3 by what you've described above, only way I see is to lift the engine out.
knowing my luck it will be in pos 3. really hope its not because ill be doing it in my flats carpark. can see a few complaints from naighbours coming soon
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Brianmoooore wrote: Does it still run OK when up to operating temp?
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
its the same cold or warm brian.
i put a new blue temp switch on on the weekend and has stopped smoking now!! yay
but.. its still abit lumpy on idle and when you touch throttle too much it looses all power then when you lift off throttle its ok.
ive got a feeling its the air flow meter ill get another one this week and try it out.
cant wait till its back on the road been driving my girlfriends 1.1 saxo for over a month and i neeeed the beast back!!! lol
i put a new blue temp switch on on the weekend and has stopped smoking now!! yay
but.. its still abit lumpy on idle and when you touch throttle too much it looses all power then when you lift off throttle its ok.
ive got a feeling its the air flow meter ill get another one this week and try it out.
cant wait till its back on the road been driving my girlfriends 1.1 saxo for over a month and i neeeed the beast back!!! lol
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
You have my sympathy! My daughter's finally seen the light, and is shifting one of these nasty little boxes on Thursday, in favour of an Audi A3. At least this is made in the right country. Progress of a sort.shanehaward wrote: been driving my girlfriends 1.1 saxo for over a month and i neeeed the beast back!!! lol
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
yeah wont be long till she sees the light lol im only 24 but ive had over 40 cars now
( insurance is traders policy ... grandads a car dealer lol) i started off in a 4 speed 903cc fiat uno, progressed to xr2is and corsa gsis, then vr6s swapped one for a 328i e36 and that was that.... wouldnt want nothing else now ive had a e30 316i, 318i touring, 320i, 320i e36, 328i, 328i sport, e34 530i v8 manual and an immaculate 540i 6 speed manual with sport kit in avus blue grey leather lsd... i loved that car cant believe i sold it.. now ive got my 335i which is turning into abit of a project but think ill be keeping this on as ive got to come off insurance soon and this will be cheap to insure for me
( insurance is traders policy ... grandads a car dealer lol) i started off in a 4 speed 903cc fiat uno, progressed to xr2is and corsa gsis, then vr6s swapped one for a 328i e36 and that was that.... wouldnt want nothing else now ive had a e30 316i, 318i touring, 320i, 320i e36, 328i, 328i sport, e34 530i v8 manual and an immaculate 540i 6 speed manual with sport kit in avus blue grey leather lsd... i loved that car cant believe i sold it.. now ive got my 335i which is turning into abit of a project but think ill be keeping this on as ive got to come off insurance soon and this will be cheap to insure for me
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Do a compression test before resorting to taking the head off!
All six pots should give roughly even readings, of around 180 psi.
Remember to remove all spark plugs and hold the throttle wide open when you do this.
The lumpiness may be because you should let it idle for at least 10 minutes to let the base idle settings be learnt, then switch off, then take it for a run throughout the rev range.
So, try disconnecting the battery or ECU for an hour to reset it, then do the initiation procedure.
All six pots should give roughly even readings, of around 180 psi.
Remember to remove all spark plugs and hold the throttle wide open when you do this.
The lumpiness may be because you should let it idle for at least 10 minutes to let the base idle settings be learnt, then switch off, then take it for a run throughout the rev range.
So, try disconnecting the battery or ECU for an hour to reset it, then do the initiation procedure.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
thanks mate ill give that a go tommorow. ill probly buy one of your chips once its all sorted what sort of increase in power do they give?Speedtouch wrote:Do a compression test before resorting to taking the head off!
All six pots should give roughly even readings, of around 180 psi.
Remember to remove all spark plugs and hold the throttle wide open when you do this.
The lumpiness may be because you should let it idle for at least 10 minutes to let the base idle settings be learnt, then switch off, then take it for a run throughout the rev range.
So, try disconnecting the battery or ECU for an hour to reset it, then do the initiation procedure.
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Quite a considerable boost, particularly in low-down torque, which makes the engine feel like the big capacity mill that it is!
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
shanehaward wrote:its the same cold or warm brian.
i put a new blue temp switch on on the weekend and has stopped smoking now!! yay
but.. its still abit lumpy on idle and when you touch throttle too much it looses all power then when you lift off throttle its ok.
ive got a feeling its the air flow meter ill get another one this week and try it out.
cant wait till its back on the road been driving my girlfriends 1.1 saxo for over a month and i neeeed the beast back!!! lol
I had this issue on a crash damaged 325i (fragger) and i swap the air flow meter with a good one and the engine ran perfect again. Mind you, the AFM looked in great condition and had no damage. The car would idle ok ish but when you twist the throttle it would do nothing nothing but just die and did back fire a once.
Try a known good AFM to eliminate that mate. Hope this help as i don't know much about M30s but they cant be far of an M20 lol
E30 Crazy!
-
MJJ_ZX6RR
- E30 Zone Regular

- Posts: 660
- Joined: Mon Nov 10, 2008 11:00 pm
- Location: Wiltshire, UK
I've got a known good, spare M30 AFM. Happy to post it to you, just send it back when you are done testing.shanehaward wrote:Try a known good AFM to eliminate that mate.
As an aside, has your car got a lambda sensor in the exhaust? If so, unplug it and see if that helps.
Martin.
----------------------------------------------------
Lots of bikes, the odd modern BMW, and now an 88 e30 335i Cab project with E32 running gear
Lots of bikes, the odd modern BMW, and now an 88 e30 335i Cab project with E32 running gear
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
[/quote]
the AFM looked in great condition and had no damage. The car would idle ok ish but when you twist the throttle it would do nothing nothing but just die and did back fire a once.
[/quote]
that is exactly what is happening to mine. so chances are it is the afm then
the AFM looked in great condition and had no damage. The car would idle ok ish but when you twist the throttle it would do nothing nothing but just die and did back fire a once.
[/quote]
that is exactly what is happening to mine. so chances are it is the afm then
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
i think im going to just buy one from my local bmw breakers he wants £35 for it. thanks alot though mate propa appriciate itMJJ_ZX6RR wrote:I've got a known good, spare M30 AFM. Happy to post it to you, just send it back when you are done testing.shanehaward wrote:Try a known good AFM to eliminate that mate.
As an aside, has your car got a lambda sensor in the exhaust? If so, unplug it and see if that helps.
Martin.
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
changed blue temp sensor and air flow meter but still the same. i forgot to mention it also floods itself i think because its running so rich?
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
just read through this and it is identical to whats happening to my 335!... going to have a look at the distributor in the morning..
http://www.pistonheads.com/gassing/topi ... 619212&i=0
http://www.pistonheads.com/gassing/topi ... 619212&i=0
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
just changed distributor cap and rotor arm still no change feels like im throwing money away now 
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Did you do a compression test?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
i havent got a comprssion tester and dont know how to do it either. im starting to think about taking it to garage even though i really dont want to
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Why not ask for one for Christmas? They're available fairly cheaply from Halfords, and are easy to operate; you remove all the spark plugs, hold the throttle wide open, and screw it into each spark plug hole in turn, crank the engine over a few times and you get the reading in psi or bar.
Repeat for each cylinder in turn - all should read about the same.
http://www.halfords.com/webapp/wcs/stor ... yId_255216
Repeat for each cylinder in turn - all should read about the same.
http://www.halfords.com/webapp/wcs/stor ... yId_255216
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Its easy, get the engine up to temp and take all the spark plugs out, wedge the throttle open then fit the tester into one plug hole. Turn the engine over via the diagnostic socket, (can remember which pins you bridge but a piece of wire is all you need) spin the engine over half a dozen times then take the reading on the dial. Write this down then move onto the next cylinder and compare figures when your done.
Local motor spares places will sell one for about £20 and you can always use it again if need be so its not money down the drain.
Edit: must type faster,
Local motor spares places will sell one for about £20 and you can always use it again if need be so its not money down the drain.
Edit: must type faster,
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
11 and 14 are the pins to bridge to crank the engine.
If you decide to do it with the key in the ignition switch instead, disconnect the - terminal (black wire) of the ignition coil first. 50,000 volts+ arcing into the wiring loom and being fed to the electronics is not good!
If you decide to do it with the key in the ignition switch instead, disconnect the - terminal (black wire) of the ignition coil first. 50,000 volts+ arcing into the wiring loom and being fed to the electronics is not good!
