I have just acquired complete e36 evo front suspension, brakes & hubs so aside from the mix of parts to get the geometry right I wondered if I do go ahead and fit them what sort of wheels I can run from the BMW wheel range ?
Also how has everyone over come the ABS differances too ?
Wheel offsets with E36 Evo 5 stud set up ?
Moderator: martauto
-
toadster987
- E30 Zone Newbie

- Posts: 109
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: Scottish Borders
-
Baurluvva
- E30 Zone Camper

- Posts: 1074
- Joined: Mon May 01, 2006 11:00 pm
- Location: Swindon Wilts
Im going to run bbs rc041's - 17" offset is 41mm and a high offset makes up for the difference of e30 and e36 hubs etc.
I am having a problem with rubbing though on the arb bushes at the mo, but was hoping the evo kingpins I have will solve it with some extra camber!

I am having a problem with rubbing though on the arb bushes at the mo, but was hoping the evo kingpins I have will solve it with some extra camber!

-
toadster987
- E30 Zone Newbie

- Posts: 109
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: Scottish Borders
I was thinking of similar wheels myself, has to be bbs ! , are those e36 sport ones ?
-
Baurluvva
- E30 Zone Camper

- Posts: 1074
- Joined: Mon May 01, 2006 11:00 pm
- Location: Swindon Wilts
Yes they are 328i sport 17's (front wheels all round) not the staggered set
-
toadster987
- E30 Zone Newbie

- Posts: 109
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: Scottish Borders
Iv seen a set of BBS RC040 fronts et41 and RC090 rears et20, does anyone know if this works out ok ?, Im planning on using compact ti rear arms
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
You need 041/042's
-
toadster987
- E30 Zone Newbie

- Posts: 109
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: Scottish Borders
looking though the wiki it does say that et20 is possible at the back with stretched tyres & rolled arches ? seems to be lots of pictures of e30s on the net with style 5's which are quite often low offsets...
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
They will be running e30 M3 5 stud.. E36 stuff is ~20mm wider per side
-
Baurluvva
- E30 Zone Camper

- Posts: 1074
- Joined: Mon May 01, 2006 11:00 pm
- Location: Swindon Wilts
Is there enough material on the backs of the wheels to remove 20mm?
-
toadster987
- E30 Zone Newbie

- Posts: 109
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: Scottish Borders
Good point thats the e36 down side then being 20mm wider
Not sure if wheels could be modified but there bbs style 5's
Not sure if wheels could be modified but there bbs style 5's
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
No!!Baurluvva wrote:Is there enough material on the backs of the wheels to remove 20mm?
-
Baurluvva
- E30 Zone Camper

- Posts: 1074
- Joined: Mon May 01, 2006 11:00 pm
- Location: Swindon Wilts
Could you flare the arches enough to accommodate them?


