Megasquirt Conversion
Moderator: martauto
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
I am converting a early high comp m20b25 to megasquirt and was wondering is it better to first upgrade the early motronic sensors for the newer 1.3 ones (mainly the crank sensor and wheel), then do the megasquirt or leave it be with the older crank senor and wheel etc?
Thanks.
Thanks.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I know NOTHING about Megasquirt, but would think it unlikely that it would be able to accept something so primitive as the two input signals from the pre facelift sensors'
There's also the distinct possibility of the flywheel shedding the indexing pin at the higher revs you'll presumably be running the engine to.
There's also the distinct possibility of the flywheel shedding the indexing pin at the higher revs you'll presumably be running the engine to.
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
Thanks, I figured as much.
My next question then is does a facelift 320 crank wheel fit on a pre-facelift 325 donk?
I should have a facelift loom being delivered soon.
My next question then is does a facelift 320 crank wheel fit on a pre-facelift 325 donk?
I should have a facelift loom being delivered soon.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
yeah the wheels will fit there the same but youll also need the vr sensor bracket 
might i ask what is the reason for going ms ??
might i ask what is the reason for going ms ??
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
[quote="ross2009"]yeah the wheels will fit there the same but youll also need the vr sensor bracket 
might i ask what is the reason for going ms ??[/quote
Cheers fella.
I got a early high comp engine which didn't have an ecu fairly cheap, i'm putting it in my 2002 once I have finished welding it up!
I want some kind of system I can play around with the tuning on.
I already have a 2002 with the 2.0 m10, just doesn't have the same sound as the 6pot, but I don't want to go too mad just yet
, thinking of a turbo later.
might i ask what is the reason for going ms ??[/quote
Cheers fella.
I got a early high comp engine which didn't have an ecu fairly cheap, i'm putting it in my 2002 once I have finished welding it up!
I want some kind of system I can play around with the tuning on.
I already have a 2002 with the 2.0 m10, just doesn't have the same sound as the 6pot, but I don't want to go too mad just yet
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
lol ha well youll like the turbo side of it but aint really cheap i can tell ya 
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
yeh, does sound like fun! 
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
there great fun to drive especially when your up the ass of a zx9r ninja and hes looking over his shoulder thinking what the f**k is a car doing up my ass lol
At full chatt lol
At full chatt lol
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
heh heh heh,bloody brilliant! Now thats something worth seeing or doing!
Out of interest what sort of money we talking here?
Out of interest what sort of money we talking here?
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
depends how far you wanna go i think i spent approx 3.5 k on my engine i rebult the whole lot obviously you dont have to do that but with some uprated head studs and and a decent size turbo and ms you prob looking at less than a grand but then its thinking of ya turbo exhaust, uprated brakes mapping etc etc
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
Defo sounds like a plan for next winter! I might be in touch with you for some pointers, if you dont mind.
Cheers
Cheers
-
retroboyo
- E30 Zone Regular

- Posts: 459
- Joined: Mon Oct 30, 2006 11:00 pm
Are there any guides for putting the latter harness on a high comp M20
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
be my pleasureAK34 wrote:Defo sounds like a plan for next winter! I might be in touch with you for some pointers, if you dont mind.
Cheers
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
you dont need a guide its litterally unplug the ecu pull the big grommet out of the bulk head and pull it thro and take the reast of he engine loom with itretroboyo wrote:Are there any guides for putting the latter harness on a high comp M20
and reverse for putting it bk it i think i done one in about 20 mins before its easy and had the engine bk in and running with in an hour
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
It does look like an easy job. Although I'm missing the injector loom for mine.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
you may need to swap the injector rail over too there different to the facelift ones
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
I guess that's something else on the shopping list.............
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
i know theres a little bit of wiring to do when you swap them over as the tacho output dont work or some thing
but im sure there some info on it on here some where
but im sure there some info on it on here some where
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
I think i read it somewhere on here too, diyefi.co.uk has a write up on installing MS. I think I read that as well when I was doing a bit of research, it was all a bit confusing at first! now it seems to make sense
.
What you running yours on?
What you running yours on?
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
ms2 v3 mate
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
If I've read right this seems to be the most popular install. Did you find it easy to work with?ross2009 wrote:ms2 v3 mate
-
E30_Crazy
- E30 Zone Regular

- Posts: 733
- Joined: Fri Mar 05, 2010 11:00 pm
- Location: Alaska, USA (Lived in Brandon, Suffolk)
You aren't refering to mine, are you?ross2009 wrote:you dont need a guide its litterally unplug the ecu pull the big grommet out of the bulk head and pull it thro and take the reast of he engine loom with itretroboyo wrote:Are there any guides for putting the latter harness on a high comp M20
and reverse for putting it bk it i think i done one in about 20 mins before its easy and had the engine bk in and running with in an hour
-
E30_Crazy
- E30 Zone Regular

- Posts: 733
- Joined: Fri Mar 05, 2010 11:00 pm
- Location: Alaska, USA (Lived in Brandon, Suffolk)
I still have some notes from when I had to fix mine. Did a facelift engine into a pre-facelift shell and body loom. If you run into any troubles with the tacho, give me a shout.AK34 wrote:I think i read it somewhere on here too, diyefi.co.uk has a write up on installing MS. I think I read that as well when I was doing a bit of research, it was all a bit confusing at first! now it seems to make sense.
What you running yours on?
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
Nice one, won't be for a few months yet, but much appreciated.E30_Crazy wrote:I still have some notes from when I had to fix mine. Did a facelift engine into a pre-facelift shell and body loom. If you run into any troubles with the tacho, give me a shout.AK34 wrote:I think i read it somewhere on here too, diyefi.co.uk has a write up on installing MS. I think I read that as well when I was doing a bit of research, it was all a bit confusing at first! now it seems to make sense.
What you running yours on?
-
b12rlw
- E30 Zone Regular

- Posts: 455
- Joined: Tue Feb 24, 2009 11:00 pm
- Location: Irvine Ayrshire
I've got all my drawings too from when I did mine. I can email u a copy if you pm me your address. Mine is a high comp 2-5 with motronic 1.3 wheel and sensor. The bracket can be bought from bm for about a tenner. Both fuel rails will work and either form of injector loom can be easily adapted. I'd sling the original loom and buy a short loom from extra efi, Phil sold me my ecu and offers sh1t hot support. Either buy new Bosch style connecters or snip them off the loom and solder them into your new loom. Benefits here are that you can customise where your loom runs.
-
AK34
- E30 Zone Newbie

- Posts: 67
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: Surrey
I've PM'd you, just sorted out the 1.3 wheel and sensor with bracket tonight.b12rlw wrote:I've got all my drawings too from when I did mine. I can email u a copy if you pm me your address. Mine is a high comp 2-5 with motronic 1.3 wheel and sensor. The bracket can be bought from bm for about a tenner. Both fuel rails will work and either form of injector loom can be easily adapted. I'd sling the original loom and buy a short loom from extra efi, Phil sold me my ecu and offers sh1t hot support. Either buy new Bosch style connecters or snip them off the loom and solder them into your new loom. Benefits here are that you can customise where your loom runs.
Cheers.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
no keleb I was referring to the megasquirt out put
yeah it's pretty straight forward to work with I made my own harness and used it plug and play to the BMW loom
but we kept having a little fault so the guy that mapped it made me a new loom and all was sorted
yeah it's pretty straight forward to work with I made my own harness and used it plug and play to the BMW loom
but we kept having a little fault so the guy that mapped it made me a new loom and all was sorted

