Refitting Touring Headlining
Moderator: martauto
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
Evening all
I need to refit a touring headlining-
How difficult is it?
Is there a guide anywhere?
Where can I get a new/decent 2nd hand one from?
TIA
Stu
I need to refit a touring headlining-
How difficult is it?
Is there a guide anywhere?
Where can I get a new/decent 2nd hand one from?
TIA
Stu
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
i will tell you in the next couple of days, as im about to attempt this myself.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
Cheers bud, it don't look simple...
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
And me - been putting it off for weeksHairyScreech wrote:i will tell you in the next couple of days, as im about to attempt this myself.

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Did you not remove the original?
Sunroof needs all of the side securing bits removing on all four sides,remove the front seats so that you can work submarine commander style standing up through the hole in the roof.
All four door seals require removing along the top edge,to expose the headliner fabric's edge.
Sunvisors and mounting clips are held by self tappers that pass through the liner.
Manual sunroof handle and surround needs to come off,power roof switch needs to come out and be unplugged.Proper engined cars with a check panel need this removing and unplugging.
All pillar trim,on all pillars
,needs removing,it slides up or down or sideways to release spring clips,do not just pull it off,or it will only go back with Tiger Seal and or self tappers...
Back at the sunroof hole,there are two self tappers buried under the sealant at the forward edge,they hold two plastic blocks glued to the underside of the liner.
Similar fitting at the talgate,but here they clip into the rear roof rail.
Liner then slides out through the tailgate,two C shaped clips hold the middle of it to the roll bar over the C pillar.
Re-fit is pretty much Mr Haynes....
Slide the liner onto the C pillar and secure the sunvisors first,then work your way round the outer edge,leaving the sunroof hole to last.Here you will need to glue the fabric back under all of the trim bits.Take great care with the stainless steel trim here,the edges are razor sharp and slice pinkies for fun,and claret on the re-covered liner will be difficult to remove...
Allow at least a day to swap a liner.
Sunroof needs all of the side securing bits removing on all four sides,remove the front seats so that you can work submarine commander style standing up through the hole in the roof.
All four door seals require removing along the top edge,to expose the headliner fabric's edge.
Sunvisors and mounting clips are held by self tappers that pass through the liner.
Manual sunroof handle and surround needs to come off,power roof switch needs to come out and be unplugged.Proper engined cars with a check panel need this removing and unplugging.
All pillar trim,on all pillars
Back at the sunroof hole,there are two self tappers buried under the sealant at the forward edge,they hold two plastic blocks glued to the underside of the liner.
Similar fitting at the talgate,but here they clip into the rear roof rail.
Liner then slides out through the tailgate,two C shaped clips hold the middle of it to the roll bar over the C pillar.
Re-fit is pretty much Mr Haynes....
Slide the liner onto the C pillar and secure the sunvisors first,then work your way round the outer edge,leaving the sunroof hole to last.Here you will need to glue the fabric back under all of the trim bits.Take great care with the stainless steel trim here,the edges are razor sharp and slice pinkies for fun,and claret on the re-covered liner will be difficult to remove...
Allow at least a day to swap a liner.
Youth is wasted on the young.
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
A day?? That's a bit pessimistic, I manged it in a couple of hours although I don't have a sunroof to contend with which makes things quicker. It's definitely a 2 man job as it's virtually impossible to line up and engage the clips that are in line with the C pillar.daimlerman wrote: Allow at least a day to swap a liner.
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Looks like Rob and Stu have found a victim to re-fit their liners! You will be able to do both cars and still have time for a bit of sightseeing...Cloggy Saint wrote:A day?? That's a bit pessimistic, I manged it in a couple of hours although I don't have a sunroof to contend with which makes things quicker. It's definitely a 2 man job as it's virtually impossible to line up and engage the clips that are in line with the C pillar.daimlerman wrote: Allow at least a day to swap a liner.
Youth is wasted on the young.
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
reason for asking is that on another forum it said you had to remove and refit the front and rear screens-
and I really cant be rsed to do that

and I really cant be rsed to do that
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
And as for a trip over the water to The 'Dam, who needs an excuse....Cloggy Saint wrote:A day?? That's a bit pessimistic, I manged it in a couple of hours although I don't have a sunroof to contend with which makes things quicker. It's definitely a 2 man job as it's virtually impossible to line up and engage the clips that are in line with the C pillar.daimlerman wrote: Allow at least a day to swap a liner.
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Removing the glass is a load of tosh.
If it comes out with the glass in place then it goes in with the glass in place.
Iv had mine out for a few weeks now for retrimming so it will be going back In once that's done.
If it comes out with the glass in place then it goes in with the glass in place.
Iv had mine out for a few weeks now for retrimming so it will be going back In once that's done.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Saloon head linings fit under the front and rear screen rubbers, but they are of a totally different construction.
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Tourings have a fibreboard tray liner,saloons use fabric tensioned by rods...bigwinn wrote:reason for asking is that on another forum it said you had to remove and refit the front and rear screens-
and I really cant be rsed to do that
On saloons,or lesser E30's
Youth is wasted on the young.
-
KimH
- E30 Zone Newbie

- Posts: 186
- Joined: Thu Dec 06, 2007 11:00 pm
I recovered my Touring's headlining last year; there's a wealth on info and tips on here if you use the search function and they're all good - that's what I did; the only thing I am unhappy with on mine was the difficulty of stretching the new fabric back under the corners of the sunroof aperture fixings.
I left the sunroof section uncut until the liner was back in place and then tried to cut out the aperture and fold it back under the fixing strips. The mistake I made was to try and stretch the foam covered fabric back from above the car with the foam in place - and it wouldn't stretch into the corners without tearing. Next time I will scrape the foam off first and soak the fabric in hot water to try and stretch it into place before clamping it with the chrome razors to which others have referred.
Also, if you're recovering the sliding sunroof liner - scrape off the foam where the fabric is glued round the front and sides of the frame or it will be too thick to slide in its channels.
I left the sunroof section uncut until the liner was back in place and then tried to cut out the aperture and fold it back under the fixing strips. The mistake I made was to try and stretch the foam covered fabric back from above the car with the foam in place - and it wouldn't stretch into the corners without tearing. Next time I will scrape the foam off first and soak the fabric in hot water to try and stretch it into place before clamping it with the chrome razors to which others have referred.
Also, if you're recovering the sliding sunroof liner - scrape off the foam where the fabric is glued round the front and sides of the frame or it will be too thick to slide in its channels.
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Mine is now back in the car - took me just over 5 Hours on Sunday
Getting the clips in place into the C-pillar is definately a 2-person job - one at the back of the car to push it forward, the other inside the car pushing the trim upwards to ensure the clips engage. Then once its in I screwed the 4 x screws into place around the sunroof aperture to hold it in place.
Then went round refitting all the handles/sunvisors etc.
All of the pillar trims are difficult to remove without breaking the tabs/clips so be careful - the only ones I didnt break are the ones right at the back of the car either side of the tailgate aperture
I also found it easier to do it all with the seats in the car - screwing the handles/visors back in takes longer than you might expect and kneeling in the footwell for any length of time will do you no favours !
Make sure you fit the plastic spacers for the grab-handles between the roof and the headlining - otherwise the covers for the screws wont clip into place because there wont be enough "give" in the lining. I've also fitted an extra grab-handle at the drivers side.
The only thing left to do is to fold the cloth into the sunroof area and glue it back into place.
I'm stumped with regard to what to do in the corners of the aperture - I don't think the fabric will stretch enough as I've had mine re-done in black suede and its nowhere near as stretchy as the OEM stuff.
I think I'll have to snip it in order to fold it into place and then carefully use some off-cuts as fill-in pieces for any gaps in the corners.
It looks the shizzle though - definately worth doing
Getting the clips in place into the C-pillar is definately a 2-person job - one at the back of the car to push it forward, the other inside the car pushing the trim upwards to ensure the clips engage. Then once its in I screwed the 4 x screws into place around the sunroof aperture to hold it in place.
Then went round refitting all the handles/sunvisors etc.
All of the pillar trims are difficult to remove without breaking the tabs/clips so be careful - the only ones I didnt break are the ones right at the back of the car either side of the tailgate aperture
I also found it easier to do it all with the seats in the car - screwing the handles/visors back in takes longer than you might expect and kneeling in the footwell for any length of time will do you no favours !
Make sure you fit the plastic spacers for the grab-handles between the roof and the headlining - otherwise the covers for the screws wont clip into place because there wont be enough "give" in the lining. I've also fitted an extra grab-handle at the drivers side.
The only thing left to do is to fold the cloth into the sunroof area and glue it back into place.
I'm stumped with regard to what to do in the corners of the aperture - I don't think the fabric will stretch enough as I've had mine re-done in black suede and its nowhere near as stretchy as the OEM stuff.
I think I'll have to snip it in order to fold it into place and then carefully use some off-cuts as fill-in pieces for any gaps in the corners.
It looks the shizzle though - definately worth doing

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
Cheers bud- This should go in the Wiki section now...
Stu
Stu
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
You bought a touring now?
B7's Motto. "If it's French, BURN IT!!!!!!"
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
We'll be selling him a cabbie next!B7 wrote:You bought a touring now?
Youth is wasted on the young.
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
Yep, next project is Ants old g plate malachite 325...
You always said get an e30 with the right amount of cylinders.
Looking forward to a cabbie one day.
You always said get an e30 with the right amount of cylinders.
Looking forward to a cabbie one day.
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Didn't touring tash own that recently?bigwinn wrote:Yep, next project is Ants old g plate malachite 325...
-
bigwinn
- E30 Zone Squatter

- Posts: 1832
- Joined: Wed May 05, 2010 11:00 pm
- Location: Lincolnshire/Leicestershire border
Yep that's the one
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...
'89 325i auto touring: Malachite Green
Now, I'm no gynecologist, but I know a tw4t when I see one...

