Rear brake pipes - replace?

Need technical Q/A then you're in the right place

Moderator: martauto

Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Nov 21, 2011 8:32 am

I redid my rear brakes last year to get through the MOT; new discs and pads, but the MOT tester showed that the right side was still weak, so I had the caliper rebuilt.

Tester saw an improvement, but still gave me an advisory, and I'm pretty sure he won't give me a pass this year.

If the brake is weak on one side only, am I right in the thinking it will be the pipe from the distribution block to the caliper? I'm not really looking forward to dropping the entire subframe to do all the plumbing...
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Nov 21, 2011 11:59 am

No air in the pipe,of course?
Caliper still working properly?
Caliper sliding properly?
Both flexi's nice and supple?

It's the flexi that goes over the beam that is the 'playfull' one,it seems as if the mounting bracket position varies slightly between cars.Sometimes you can get a spanner on both sides of the connecter,sometimes you cannot.
Most usefull advice that I was offered some time back was to slice the flexi as close as possible to it's ferrule,then use a deep 14mm socket to hold the remains still and use a brake pipe spanner on the other side.When that fails to work :-x slice the hard line close to the threeway connector and break the spring clips out!
Then you can yank the lot out and replace all components.
Youth is wasted on the young.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Nov 21, 2011 12:10 pm

I'd done a search and read all your excellent tips on this, daimlerman :D I even have the same set of crow's feet spanners as you.

RealOEM shows that, from the T-piece, it goes hardline - flexi - hardline - flexi - caliper. Is that right? and in that case, it's the middle flexi you're talking about I presume.

Cor, even after all these years these cars make me feel like a novice sometimes
:mad:
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Nov 21, 2011 12:23 pm

Grrrmachine wrote:I'd done a search and read all your excellent tips on this, daimlerman :D I even have the same set of crow's feet spanners as you.

RealOEM shows that, from the T-piece, it goes hardline - flexi - hardline - flexi - caliper. Is that right? and in that case, it's the middle flexi you're talking about I presume.

Cor, even after all these years these cars make me feel like a novice sometimes
:mad:
That's correct.

IMO,it's just not worth the hassle replacing one part here,for the cost of a set of flexi's and a bit of cunifer,spring clips and so on,do the lot in one hit!
Those crow's feet are exellent for attaching the new over beam flexi,hold with that and use a spanner on the other side.
Youth is wasted on the young.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Nov 21, 2011 7:45 pm

can anyone confirm who the OEM manufacturer of these parts is? I'm getting prices of 22 quid from BMW for the flexis, but only 5quid for FEBI flexis from my local parts supplier...
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Nov 21, 2011 8:01 pm

I have fitted braided s/s flexi's!

OK,they are more expensive than plain rubber,but they should never,ever,need replacing.
Youth is wasted on the young.
User avatar
BenHar
E30 Zone Addict
E30 Zone Addict
Posts: 3089
Joined: Sun Jul 11, 2010 11:00 pm
Location: Reigate, Surrey

Post Mon Nov 21, 2011 8:04 pm

daimlerman wrote:I have fitted braided s/s flexi's!

OK,they are more expensive than plain rubber,but they should never,ever,need replacing.
I don't think this is right. They give a harder pedal feel but they still have rubber inside the braid and it will perish just like any other.

Ben
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Nov 21, 2011 11:29 pm

BenHar wrote:
daimlerman wrote:I have fitted braided s/s flexi's!

OK,they are more expensive than plain rubber,but they should never,ever,need replacing.
I don't think this is right. They give a harder pedal feel but they still have rubber inside the braid and it will perish just like any other.

Ben
Shouldn't be any rubber in these - the inner liner is PTFE.
These can last a long time, but when they do fail, they fail completely and without warning.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Nov 27, 2011 10:37 am

One last question; there's two flexis per side on the rear beam; 200mm and 224mm. For some inexplicable reason, my dealer can't get the shorter hose, so is there any harm in using the slightly longer flexi in its place?

I can't imagine 24mm is going to lead to a terrible kink :?
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Nov 27, 2011 12:44 pm

You buying them from BMW? If not get your parts place to look at the cars listed in the link below, they all use the same pipe :wink:

http://www.realoem.com/bmw/partxref.do? ... showeur=on