Subaru Impreza Calipers

Need technical Q/A then you're in the right place

Moderator: martauto

Robbo-80
E30 Zone Regular
E30 Zone Regular
Posts: 282
Joined: Tue Jan 26, 2010 11:00 pm
Location: Montrose, Scotland

Post Thu Nov 17, 2011 9:29 pm

Looking into buying a set of Subaru Impreza Front Calipers for my E30. Can anyone point me in the right direction of Discs i would need to get.
Also does anyone have the link to the machine drawings for the brackets for fitting the Calipers?

Any help would be very much appreciated.
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sat Nov 19, 2011 3:07 pm

Never heard of using them TBH, under 15" BBS wheels then VW Corrado G60 discs are 20mm bigger in diameter at 280mm but the mounting flange is 2mm thinner at 5mm, Keri WMS sells 2mm spacers to get the wheel back to the standard position.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
BadDave
E30 Zone Team Member
E30 Zone Team Member
Posts: 6012
Joined: Sun Jan 09, 2005 11:00 pm
Location: Nr Aberdeen.Scotland(Gods country)

Post Sun Nov 20, 2011 3:10 pm

Realisticly,it's an uncommon caliper choice.
It could be done,and will take time and require a bit of trial and error to figure out what's needed re wheel offset,disk offset,disk diameter etc.


G60 disks may work if the lug mountings of the Scooby calipers are pretty similar to RX7 ones.
Alpina B10 3.2L #187 (1 of 64 brought into the UK)
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Mon Nov 21, 2011 2:01 am

I've got a feeling they are cast iron as well? Could be wrong.
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Mon Nov 21, 2011 9:31 am

which impreza calipers? as there has been many versions.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&