Steering Rack Question

Need technical Q/A then you're in the right place

Moderator: martauto

turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Fri Nov 18, 2011 9:54 pm

I'm changing the steering rack for a Z3 or an E46 rack, I've got a cheaper end Hot Tuning manifold, am I going to have problems with the new rack fouling the pipes.
User avatar
Mikey_Boy
E30 Zone Regular
E30 Zone Regular
Posts: 996
Joined: Sun Mar 16, 2008 11:00 pm
Location: Cheshire - trying to avoid the bling!

Post Fri Nov 18, 2011 10:42 pm

Quite possibly... :(
turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Fri Nov 18, 2011 10:58 pm

OK but does anybody actually know for sure.
User avatar
b12rlw
E30 Zone Regular
E30 Zone Regular
Posts: 455
Joined: Tue Feb 24, 2009 11:00 pm
Location: Irvine Ayrshire

Post Fri Nov 18, 2011 11:14 pm

you soon will, once attempting to fit it. some combos of parts work others dont, only way to know for sue is to try and fit them.
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Sat Nov 19, 2011 1:44 am

i would expect clearance to be tight and i would think that the exhausts or the linkage would need modification.

probably both.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Nov 19, 2011 1:49 am

You will not be able to use an E36/46 rack with a Hottuning manifold.

Unless you modify the front crossmember by moving the rack mounting tabs.This is not something that I would suggest is suitable as a modification,unless you,or the person carrying out the work,is a qualified engineer.
Youth is wasted on the young.
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Sat Nov 19, 2011 8:14 am

What part would hit the manifold?
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sat Nov 19, 2011 10:23 am

Rob you might get away with one of DanThe's linkage rods which remove the coupling in the middle, I think the thread was in the group buy section. Whichever way you go it's going to be trial and error with the car off the road IMHO
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Nov 19, 2011 10:37 am

hongkongfuey wrote:What part would hit the manifold?
I would expect the steering guibo to foul.

My answer above is based on work done by Temple30 some years back,he fitted a quicker rack with one of the initial run of BTB1 manifolds.I cannot remember the detail,but he needed to move the rack mounting tabs to the left an inch or so.The end result was a car with more steering lock in one direction...
Now the solid lower link is available from Dan,it may be possible without this kind of modification,but the safe answer to 'will a quicker rack fit with Hottuning' must,I feel,remain,not without other work!
Youth is wasted on the young.
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Sun Nov 20, 2011 9:31 am

I got a e36 rack with the already made up link, e36 top e34 was bought from the zone
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sun Nov 20, 2011 10:04 am

Is yours the same sa in this link, which does away with the centre coupling for increased clearance?

http://www.e30zone.net/modules.php?name ... 45&start=0
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Sun Nov 20, 2011 12:18 pm

no, it has the waffeled/crinkled top part from e36 and the guibo 2/3 down ill get a pic up
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Sun Nov 20, 2011 5:46 pm

Image
Image
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sun Nov 20, 2011 6:17 pm

Don't bother trying to fit until you get one of DanThe's linkage assemblies IMHO.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Sun Nov 20, 2011 7:07 pm

if i turn it upside down the guibo should miss?
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Nov 20, 2011 10:35 pm

There's a limited space on an E30 where both the steering linkage and the exhaust primaries have to co exist. Because of this, all RH drive manifolds aim for the space where the E30 linkage isn't.
Because of the different pinion angle of the E36/46 racks, when converting to one of these, it's just about inevitable that the manifold primaries will already be occupying that space, and mods. need to be made.
Anyone ever tried using an E36/46 rack on a RH drive car, using a LH drive manifold? At least this won't be deliberately designed to foul where the linkage needs to be.