Stupid question but...
Moderator: martauto
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
I have the front struts off the car in one whole peice with springs etc... Now to undo the strut at the top I need a tool that allows me to access both nuts... What is this tool?
Trying to find it and not going great.
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
windy gun 
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Is there nothing else a bit cheaper than the full air kit as I do not have a compressor. 
-
groovylee
- E30 Zone Regular

- Posts: 356
- Joined: Sat Aug 13, 2011 11:00 pm
- Location: Shefford, Beds
i havent seen these so cant comment. however, i do know that if it is similar to my old alfa, i used a box spanner for the nut, with an allen key though the middle of it.
sorry i can't be more help.
sorry i can't be more help.
1989 320i Cab for sale - http://www.e30zone.net/modules.php?name ... highlight=
-
groovylee
- E30 Zone Regular

- Posts: 356
- Joined: Sat Aug 13, 2011 11:00 pm
- Location: Shefford, Beds
or, take them to your friendly local garage and ask nicely if they will undo them with their windy gun?
1989 320i Cab for sale - http://www.e30zone.net/modules.php?name ... highlight=
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
I'm sure if you take it to local garage, they will whip them off in seconds
If I remember it's a weird size you need really slim socket
If I remember it's a weird size you need really slim socket
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Thanks lads, might have to take them down to my mot place to see if they'll undo them for me...
The last set I managed to get some mole grips round the centre strut bit to hold it, doesnt seem to want to hold this time
They should have a specific tool for this if there isnt already one...
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
You really should have slackened,but NOT removed,the 17mm nyloc nut BEFORE removing the bloody strut!
Then a set of spring compressers to take the tension off the spring,and Bob is your mother's brother...
Then a set of spring compressers to take the tension off the spring,and Bob is your mother's brother...
Youth is wasted on the young.
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Yes, I realise this now
Take it there is no special tool designed just for this then... 
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
As mentioned before, a box spanner ( like a spark plug tool) so you can pass something down the middle to hold the centre
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.

-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Ahhhh, that would be ideal, I need to get a tiny ratchet then as only got larger ones.. 1/2 inch and 3/4 inch or what ever size they are... I shall see if my old man has one at his work I can borrow to never return 
-
groovylee
- E30 Zone Regular

- Posts: 356
- Joined: Sat Aug 13, 2011 11:00 pm
- Location: Shefford, Beds
awesome link that gooner, i will bookmark that for when i rebuild my suspension. thanks very much 
1989 320i Cab for sale - http://www.e30zone.net/modules.php?name ... highlight=
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
I had to improvise with my B4's - had to use an allen key in a pair of molegrips to hold the damper rod in one place allen key through a deep 17mm socket using a separate pair of molegrips on the outside of the socket to tighten it up - an epic bodge but it workeddaimlerman wrote:You really should have slackened,but NOT removed,the 17mm nyloc nut BEFORE removing the bloody strut!
Then a set of spring compressers to take the tension off the spring,and Bob is your mother's brother...
And the drop it onto its wheels for the final tightening

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
I had a quick go with the suggestion from Gooner
Snapped the little extention bar then had to go out... Must get some better quality kit
Should have a few more of them some where...
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
You can f*ck about with these for hours. Windy gun! I wouldn't be without one now.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
I think its a future investment for sure. I need to plumb in some power to my unit first though, and before that I need to concrete base the floor out and sort the roof (Leaking)
Then make some wall unit spaces, then start buying some more kit and I think this will be one of the first.
