5 stud conversion
Moderator: martauto
-
321gazza
- E30 Zone Regular

- Posts: 342
- Joined: Fri Sep 07, 2007 11:00 pm
Have an e30 that i will convert to 5 stud have all the e36 evo parts but what offset should the wheels be, going 17".
-
penton08
- E30 Zone Camper

- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
Standard e36 offset, somewhere around et 41- 46 iirc.
-
321gazza
- E30 Zone Regular

- Posts: 342
- Joined: Fri Sep 07, 2007 11:00 pm
Also would like the struts to be coilovers, but have a 4 pot engine, so if i fitted the evo struts it would be to hard and raise the front up, so can i get them revalved or are they sealed units, also does the e30 top mount fit the evo strut as would like adjustable top mounts.
-
Aston-AKA-Ash
- E30 Zone Newbie

- Posts: 43
- Joined: Wed Apr 27, 2011 11:00 pm
- Location: Preston, Lancs
is there an easy link to bits needed for a 5 stud conversion?
Or is it as simple as getting new hubs and arms and bolting them on?
Or is it as simple as getting new hubs and arms and bolting them on?
Just here for research for now.
E30 project will start early 2012 after Mk4 XR3i cab resto-mod project is finished.
E30 project will start early 2012 after Mk4 XR3i cab resto-mod project is finished.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Aston-AKA-Ash
- E30 Zone Newbie

- Posts: 43
- Joined: Wed Apr 27, 2011 11:00 pm
- Location: Preston, Lancs
Thats effing fantastic. Thankyou.Grrrmachine wrote:We're so good to you, here on the Zone:
http://www.e30zone.net/e30zonewiki/inde ... Conversion
Will come in handy when i get one now!
Just here for research for now.
E30 project will start early 2012 after Mk4 XR3i cab resto-mod project is finished.
E30 project will start early 2012 after Mk4 XR3i cab resto-mod project is finished.
-
321gazza
- E30 Zone Regular

- Posts: 342
- Joined: Fri Sep 07, 2007 11:00 pm
Thank you guys, great stuff.
-
321gazza
- E30 Zone Regular

- Posts: 342
- Joined: Fri Sep 07, 2007 11:00 pm
has anyone fitted a 5 stud set up from a mz3 including diff ect onto their e30.
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Haven't seen one.
Just to add to that the 6cyc 2.2 badged z3 I sorted the breaks on last week had the strengthened trailing arms.
Just to add to that the 6cyc 2.2 badged z3 I sorted the breaks on last week had the strengthened trailing arms.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
