Refuelling Issue

Need technical Q/A then you're in the right place

Moderator: martauto

poolnoodle
E30 Zone Squatter
E30 Zone Squatter
Posts: 1785
Joined: Sat May 24, 2008 11:00 pm
Location: Hobart, Tasmania, Australia

Post Thu Nov 03, 2011 2:20 am

Hi All,
An odd (an not ultimately serious) issue but thought someone might be able to shed some light:
When I refuel my E30, the bowser pump keeps cutting out (like when tank is full) right from the start.
I can fill the car OK but can only squeeze trigger about half way and have to fill slowly.
Maybe an air lock of something similar? :?
Any suggestions?
TIA
'83 Bronzit 323i (mmmm, chrome)
'74 Polaris 2002 (mmmm, retro)
'89 Delphin 535i (mmmm, waft waft)
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Thu Nov 03, 2011 2:24 am

dont insert the pump all the way in... leave it half way or 1/4 way in and squeeze slow.. quite normal on all cars
clipper
E30 Zone Squatter
E30 Zone Squatter
Posts: 1980
Joined: Mon Aug 22, 2005 11:00 pm
Location: Madrid

Post Thu Nov 03, 2011 8:07 am

Strangely I find the opposite works. If I put the nozzle all the way in and then rotate it slightly anticlockwise (to align the flow with the inlet pipe) I can use full power from the pump.

No chance of filling the auxiliary 15l gravity feed tank like this though. That requires barely inserting the nozzle and filling at a trickle while stooping down to see when the fill level is about overflow..... :mad:
These are sensations as hard to forget as they are to ignore.....
User avatar
b12rlw
E30 Zone Regular
E30 Zone Regular
Posts: 455
Joined: Tue Feb 24, 2009 11:00 pm
Location: Irvine Ayrshire

Post Thu Nov 03, 2011 10:40 am

i spend about five or seven minutes putting 1/2 a tank in. The w@nk that had the car before me added an aero filler and has bodged the filler neck too, usually resulting in my shoes stinking of 99 octane the rest of the day! I'm planning to fully modify the fuel filler line at some point.

This is not likely to help you much, sorry.
320iAN
E30 Zone Camper
E30 Zone Camper
Posts: 1395
Joined: Sat Sep 16, 2006 11:00 pm
Location: West Scotland

Post Thu Nov 03, 2011 11:25 am

all E30's are the same when it come's to modern flowing fuel pump's.. due to the narrow diameter & the bend's on the filler pipe :) you will find a reliable method, i hold the nozzle at a slight angle and only insert about an inch & also only half pressure on the trigger :)
Image
poolnoodle
E30 Zone Squatter
E30 Zone Squatter
Posts: 1785
Joined: Sat May 24, 2008 11:00 pm
Location: Hobart, Tasmania, Australia

Post Wed Nov 16, 2011 1:36 am

Thanks guys. I had already adopted methods described. Sounds like a normal issue.
'83 Bronzit 323i (mmmm, chrome)
'74 Polaris 2002 (mmmm, retro)
'89 Delphin 535i (mmmm, waft waft)
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Wed Nov 16, 2011 12:46 pm

as soon as i opened this it reminded me of the fact mine does exactly this.
i have to go gentle on the pump as well, i think its just dumping too much fuel down the neck at once and bubbling back.
may mean the tank breather is a bit blocked as well though and that can cause the air to bubble up the neck.

i never really thought it was an issue.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Wed Nov 16, 2011 1:06 pm

I have never had this problem with my 325i touring, my e36 323i sport touring on the other hand. :cry: