Mayo'd oil in my throttle body and inlet manifold...

Need technical Q/A then you're in the right place

Moderator: martauto

cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Tue Nov 15, 2011 4:26 pm

Started stripping my intake system today to give it a clean up, only to find that the throttle body, inlet manifold and breather pipes are full of mayo'd oil, but the engine/head is clean...

Any ideas? Water getting in somewhere I presume...

Image
Image
Image
Image
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Wed Nov 16, 2011 1:58 am

been driving in heavy rain?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Nov 16, 2011 9:32 am

A degree of this is normal, but your's does look a bit excessive.
Clean everything up, including the inaccessible area under the rocker cover where the breather hose connects, and see if this cures it.
The problem, IF there is one, is a worn engine bottom end.
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Wed Nov 16, 2011 12:43 pm

as Brian says an amount is nothing unusual as the air being sucked into the engine is not bone dry and will cause a small amount of mixing.

the oil quantity is not unusual as thats just what comes up the positive breather, but that looks like a hell of a lot of water, and not coolant, fresh water?
thats what made me say heavy rain as i would have thought stop starts would have produced it in the rocker as well.

does the 4 pot use the inlet heater as well?
although its before the throttle as well.
any water in the bottom of the air box?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Wed Nov 16, 2011 1:23 pm

Nothing in air box, I think the pool of water was made worse by myself by accident when I unattached the inlet 'heater' without realising what it was, some water got into the inlet manifold and made the pool look bigger!

I'm thinking this is mostly condensation as the car was sat for a long time over last autumn, winter and spring. There are various breather pipes perished or cracked so also lots of opportunities for moisture to get in.

I've done a lot of research and asking around and all point towards fix the pipes, clean the rest and see how it goes. I'll do this and see if it cures it (hopefully!)
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm