Front tow bolt size, where to get one?

Need technical Q/A then you're in the right place

Moderator: martauto

milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Sun Nov 13, 2011 7:19 pm

Hi guys, here's a silly question! I've looked around the net and these boards, perhaps I'm using the wrong terminology - it does happen.

I bought a TRS tow strap and after studying lots a pictures of track car E30s I decided I'll cut a strip hole in the bumper and feed the strap through that. The trouble is, where can I get a bolt the right size to fix it to the towing point?

Didn't think it would be this hard but Halfords were completely confounded

Many thanks in anticipation of a very obvious answer that's elluding me!
User avatar
greggers
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Mon Jul 04, 2011 11:00 pm

Post Sun Nov 13, 2011 7:42 pm

On ours (pre-facelift) the tow hook is integral to the body, it's welded on. If you have an Tec 1 kit fitted you essentially get a tow hook clamped over the body tow hook to extend its reach beyond the bumper.

Looking at the pictures of TRS straps on Demon Tweeks, I think you'll have to make your own mount/bracket to fit it, and you'll probably need to weld some extra strength into wherever you are going to fit it.
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Mon Nov 14, 2011 6:35 pm

Mine (trs) is bolted to the os chassis rail and then feed through the slat in the front valance.
M30 Tech 1 Touring on gas.
Image
milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Mon Nov 14, 2011 8:26 pm

Cheers so far.mine is post face lift so all I need is the correct size bolt.just not sure where to find one?
User avatar
threelander
E30 Zone Camper
E30 Zone Camper
Posts: 1166
Joined: Fri Jan 14, 2011 11:00 pm

Post Mon Nov 14, 2011 8:42 pm

hi miles what you are saying is that you need to know the size of the thread yeh
milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Mon Nov 14, 2011 10:11 pm

Yes please and where to get one.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Nov 14, 2011 11:58 pm

If you're looking for the thread on the screw in front towing hook, the only place you'll find one is attached to a BMW towing eye. It's a very coarse non standard thread.
milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Tue Nov 15, 2011 9:04 am

Ok thanks Brian. I guess it's off to the garage for a spot of welding then!

That will be why I can't find one... hope this helps someone else one day.
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Tue Nov 15, 2011 2:49 pm

I assume you have looked down next to your jack, where the tow eye is stored? Otherwise look at scrap cars or people breaking. Not hard to find.
Image
milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Tue Nov 15, 2011 3:53 pm

I have the towing eye, but the eye bit oviously sticks out as it's meant to, which isn't ideal because I'll be using the strap. I guess get the garagae to cut it and use that as the bolt? As long as it's secure I don't care.