injector air leak

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
navi
E30 Zone Newbie
E30 Zone Newbie
Posts: 142
Joined: Thu Mar 09, 2006 11:00 pm
Location: canvey island

Post Sun Nov 13, 2011 1:43 pm

hello all,after owning my sport for nearly 10yrs now,looking at sending it off to its grave as soon as i can,just what to replace it with?.anyway its starting to run sick,just re-gapped all the tappets&genrel look over,it seams as number 6 injector has an air leak,by the sound of it and spraying easy start around it the revs pick up,so that comfirms it,is this a commom problem on these and can you buy the seals on their own?iam not looking at spending a great deal on it now,i may have some spare injectors,just a pain to have to take all the inlet off for just that one! whats the best line in your veiw to handle this?

thanks..
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Nov 13, 2011 3:13 pm

#4 on here. Just a simple O ring: http://bmwfans.info/parts/catalog/E30/2-
doors/Europe/325i-M20/RHD/M/browse/fuel_preparation_system/valves_pipes_of_fuel_injection_system/
Not common at all, unless an injector has been removed and replaced without changing the ring.
Sure it's not the inlet manifold gasket nearby?
User avatar
navi
E30 Zone Newbie
E30 Zone Newbie
Posts: 142
Joined: Thu Mar 09, 2006 11:00 pm
Location: canvey island

Post Sun Nov 13, 2011 4:11 pm

yes deffo injector leaking,as i used a straw on the can to spay easy start were i wanted it,its a round the base as it go's into the mainifold you can hear it,but the gasket top back does look like its gone,but theirs no diffarence when spayed,nipped the nut to make sure,runs smoother now the tappets are done as thay were tight,just seams a lot of work for one o ring!