it only does it sometimes, but its getting more common, and when it does it's bloody annoying!!
it goes "wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!!!!!"
anyone got a solution?
cheers
is there a cure for a whistling heater fan?
Moderator: martauto
-
stevo
- E30 Zone Regular

- Posts: 984
- Joined: Sun Mar 06, 2005 11:00 pm
- Location: Kilmarnock, scotland
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
nope!
New fan
Andrew
New fan
Andrew
-
stevo
- E30 Zone Regular

- Posts: 984
- Joined: Sun Mar 06, 2005 11:00 pm
- Location: Kilmarnock, scotland
cheers anyway
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It's the fan motor bearings.
Take the big metal plate off the bulkhead behind the engine, unclip the covers of the fan housings and with something with a long spout put a couple of drops of light oil on the bearings. Run the fan a bit and push the whole motor shaft sideways each way to work the oil into the bearings. Do this two or three times and that should shut them up for the next fifeteen years or so.
Take the big metal plate off the bulkhead behind the engine, unclip the covers of the fan housings and with something with a long spout put a couple of drops of light oil on the bearings. Run the fan a bit and push the whole motor shaft sideways each way to work the oil into the bearings. Do this two or three times and that should shut them up for the next fifeteen years or so.
-
stevo
- E30 Zone Regular

- Posts: 984
- Joined: Sun Mar 06, 2005 11:00 pm
- Location: Kilmarnock, scotland
cool!Brianmoooore wrote:It's the fan motor bearings.
Take the big metal plate off the bulkhead behind the engine, unclip the covers of the fan housings and with something with a long spout put a couple of drops of light oil on the bearings. Run the fan a bit and push the whole motor shaft sideways each way to work the oil into the bearings. Do this two or three times and that should shut them up for the next fifeteen years or so.
you truly are an electronical genius!
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
I was under the impression that the barings are nylon and not metal?
Andrew
Andrew

