rear window mechs 'Q'

Need technical Q/A then you're in the right place

Moderator: martauto

magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Mon Nov 07, 2011 5:39 pm

one of my rear mechs isn't playing ball and won't work i can hear the motor click as if it wants to turn but won't.

i've taken the two screws out that fix the motor to the lifter cable housing but it won't come out,it only comes out about half an inch if that.

Image

how do these come out ?

is there a way of getting at the spool of cable to check if it's rusty or just stuck,

i had hoped to change the motor with one from a front door lifter but that won't come out either :(

Image

i've undone this screw, what's it's function :? bottom left big brass screw

Image

can it be fixed or shall i just write it off ???


tia Mick.
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Nov 07, 2011 5:43 pm

I've managed to get the motor off the gearbox on two of those scissor-jack style mechanisms, just by undoing every visible screw and a bit of gentle persuasion.

No idea how to separate the cable version though.

As for repair; I remember reading a post AAAAGES (two years +) ago about stripping these motors, de-rusting the innards and rebuilding, so it can be done. Just no idea where that page went.