Hi peeps, can anyone tell me whether the above kits come with a material spec sheet specifying the mechanical properties of the bolts? The reason I'm asking is, I'm a mechanical engineer and am struggling with the idea of paying £100 odd pounds for a set of fasteners which are branded (ARP) when I can get my hands on a box of 100 M10x150 generic cap screws for the same cost. The 12.9 designation refers to the required strength of the bolt i.e UTS > 1220 MPa, yeild strength of > 1100 MPa. I can buy the equivelent cap screws in packs of 20 for far less than the ARP branded ones.
Might this just be a case of "paying for a brand"?
ARP HEAD STUD/BOLT KITS
Moderator: martauto
-
vladv
- E30 Zone Newbie

- Posts: 46
- Joined: Wed Nov 11, 2009 11:00 pm
Hi.
Yes they are expensive. Look this for your questions. http://arp-bolts.com/pages/mfg_aerospace.shtml
Does anyone know less branded producer of engine studs?
Yes they are expensive. Look this for your questions. http://arp-bolts.com/pages/mfg_aerospace.shtml
Does anyone know less branded producer of engine studs?
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
thats all ive got in mine a set of high tensil cap heads cost me about 40 quid 


