325i Facelift into 320i Prefacelift?

Need technical Q/A then you're in the right place

Moderator: martauto

Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 8:02 pm

Given up with the search function on here as it brings back every post ever posted with '325i' in... :roll:


Any how... Dont intend on doing this yet, if at all, just a thought at the moment.


I have a 325i Auto Engine in the touring.

And a 320i auto in the chromie...

Now, is this still a plug and play swicth with the loom etc? Or would it be slicing action due to one being pre and facelift?


Also, would need to switch the breaks over too, would this be a straight swap from the touring or do they differ from pre and facelift again?

Engine from the the touring is from another car, which I think was a 88/89 model of some sort...

The chromie is a 87.


Any info on the above? Suggestions etc?

Should be pretty simple to get done in one weekend really, although the touring engine is running a little off at the moment, not picking up power for ages before reving its bits off. Would it be better to sort this issue first then switch or sort it once its switched, if I was to switch of course.



And finally, who is bored in the midlands and would want to get this done with me on a saturday/sunday so it fully working and going? Bacon butties and tea supplied. winkeye
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Fri Nov 04, 2011 8:06 pm

the B2.5 will plonk straight in but keep it's engine loom attached so it retains Motronic 1.3, it's very near plug and play,
you will need to change it to an earlier waterpump to keep the old cooling system that the chromie already has, :D
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 8:10 pm

Thats what I thought with the loom side as then it could be 'upgraded' etc if I was to chav race it up. :twisted:


When you say earlier waterpump, would that be one for a 2.5 chromie?

I'm really toying with the idea at the moment as I've got no work on at the moment and it would make the chromie a bit quicker...

Also, the touring has the sport auto box thing... Would that be plug and play too?
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Fri Nov 04, 2011 8:14 pm

if you want to make it quicker dump the spazbox :D

using the switchable auto would be a pain it uses quite a lot of wiring and an ECU, so stick with the 320i spazbox,

early cars use a different waterpump, IIRC it has 2 outlets instead of the single one on a facelift donk, you need to use this to retain the older cooling system
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 8:17 pm

The 320i box be ok with a 325i engine? I quite like the idea of the switchable part aswell but I suppose I can have a pretend switch :mad:


You know much about the brakes? Struts etc... Would they fit from the touring Or a 92 convertible even? Reason being is thats something I could upgrade anyway and then at a later date wouldnt need to faf about as it would already be done etc.
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Fri Nov 04, 2011 8:20 pm

Jim, why not stick a manual conversion in too. winkeye
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 8:26 pm

Have you seen me drive a manual? :mad: I'll demonstrate next time I see you... :(
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Fri Nov 04, 2011 8:30 pm

Front struts and rear arms of the cab will fit, an will be better than the smaller struts on yours.
So swap them over
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Fri Nov 04, 2011 9:34 pm

Jim, depending on when you do this, i might be interested in popping up to give you a hand, just depends what shifts i am on. would be good to get my head around the swap as i might be thinking of doing something similar in the future. drop me a PM when you are thinking of doing it, and i will confirm availability :D

Lee
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 10:01 pm

Sounds good mate :cool: I have switched an engine before, the one thats in the touring now was the replacement, I was just concerned about the year differences etc. But your more than welcome to come along if I go ahead with it :cool:
Curr946
E30 Zone Regular
E30 Zone Regular
Posts: 425
Joined: Tue Dec 23, 2008 11:00 pm
Location: Inverkeithing Fife

Post Fri Nov 04, 2011 10:06 pm

2 wires will need modified on your engine loom to get your rev counter and eco guage working. ill check and see which 2 it is as ive got a loom that jbh sorted for me
If your wife must learn to drive, don't stand in her way!
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 10:17 pm

@Curr946 - Nice one dude, If you have any pictures etc, it would be very helpfull.

Anyone know if the fuel setup from the early external pump style would be an issue? I doubt it but want to check first... Slowly building everything up to do the fuel tank/lines/whole fuel system to replace when I get round to it...

Also, would the 320 gearbox be ok with a 325 engine?

Diff wise, I have a selection of 3 standard ones... 3.64, 3.73 or 4.27, The 4.27 would be nice, although I dont really like the idea of the high fuel cost when driving long distance etc... Although the only time I do very long distance is when going to shows etc so I wouldnt mind so much.
User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Fri Nov 04, 2011 10:31 pm

Jim320i wrote:Sounds good mate :cool: I have switched an engine before, the one thats in the touring now was the replacement, I was just concerned about the year differences etc. But your more than welcome to come along if I go ahead with it :cool:
no worries dude :)
Curr946
E30 Zone Regular
E30 Zone Regular
Posts: 425
Joined: Tue Dec 23, 2008 11:00 pm
Location: Inverkeithing Fife

Post Fri Nov 04, 2011 10:34 pm

the 320 auto box will be up to the job just give it fresh ATF and clean the metal gauze on the the pick up in the sump of the box.

you'll need to change the throttle position sensor and check pin 21 on the car side of the c101 to make sure there's not an earth there.
If your wife must learn to drive, don't stand in her way!
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Nov 04, 2011 10:39 pm

Hmmmm... Would, a prefacelift engine be a plug and play? :mad: I dont mind holding out for a while until I pick up a rotten 325 chromie in the future when im more 'flush'