885 M20B25 Head Thickness?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jure
E30 Zone Newbie
E30 Zone Newbie
Posts: 137
Joined: Thu Aug 27, 2009 11:00 pm

Post Thu Nov 03, 2011 1:15 pm

What is standard 885 head thickness from later M20B25 engine?

How much head can be skimmed?
User avatar
punko
E30 Zone Newbie
E30 Zone Newbie
Posts: 123
Joined: Wed Dec 30, 2009 11:00 pm

Post Thu Nov 03, 2011 4:37 pm

do a plastacine test
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Thu Nov 03, 2011 5:10 pm

There is a dimple on the head in two corners, the head can be skimmed until this dimple is gone then the head is scrap.
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Thu Nov 03, 2011 6:56 pm

^^ what he said is the simplest way, they are cast in from factory for this purpose.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&