I've put my winter tyres on and noticed that one is pretty worn on the inside. I haven't lowered the car in any way, so I'm guessing something's wrong with my suspension.
Ruling out the ballache repairs of rear beam bushes, what else can I replace on the rear suspension to cure this issue?
I don't want to throw hundreds at it to refresh the whole back end though (well, I do want to, but I can't afford to)
Rear inner tyre wear - touring
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
too much sideways maybe? 
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Its common on E30's for the inner to wear first on the rears.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
if its just one side something could be bent from a previous mishap. The arm or beam, do they look the same?!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Break out the string and the spirit level, and measure the suspension camber and toe.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
According to the last MOT sheet (when the geometry was done):
Camber: -0.53 and -1.11, when the tolerance is -2.30 to -1.30
Toe: -1.05 and -1.33, when the tolerance is -0.04 to 0.26
Not sure whether it's the toe or camber causing the issue, but I'm really hoping it's not a bent trailing arm...
Camber: -0.53 and -1.11, when the tolerance is -2.30 to -1.30
Toe: -1.05 and -1.33, when the tolerance is -0.04 to 0.26
Not sure whether it's the toe or camber causing the issue, but I'm really hoping it's not a bent trailing arm...
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
