Compression test without cambelt

Need technical Q/A then you're in the right place

Moderator: martauto

Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Oct 27, 2011 4:21 pm

I'm going to test the engine after the cambelt snapped last week. It's not my first time (oo er) so I know about undoing the rubber intake boot and jamming open the throttle body.

But I presume with no cam rotation, there's a chance some of the valves are still open, aren't they? If the cam stopping spinning is there a chance some of the exhaust valves are still open, or would the springs definitely have pulled them closed by now (presuming the valves aren't themselves bent).

Basically, am I going to have to move the cam by hand as I test each cylinder?
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Thu Oct 27, 2011 4:25 pm

you could do further damage by spinning up the bottom end while the cam shaft is moved by hand to suit each pot for the test. Fit a second hand belt, time it up correctly and compression test.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Oct 27, 2011 4:26 pm

johnl320 wrote:Fit a second hand belt, time it up correctly and compression test.
I've got no access to those sorts of luxuries :(
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Thu Oct 27, 2011 6:24 pm

Grrrmachine wrote:
johnl320 wrote:Fit a second hand belt, time it up correctly and compression test.
I've got no access to those sorts of luxuries :(
A new belt is less than £10? or can you not easly get one over east?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Oct 27, 2011 6:33 pm

Nah, cheapest belt over here is at least 30 quid.

The more I read, it seems I have a 0.0001% chance that I haven't suffered damaged valves. That means head off, which means new head gasket at least. Add to that the cost of the valves themselves, there's no point even trying if a 2.5 engine is only 200 quid.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Oct 28, 2011 1:28 am

Grrrmachine wrote:Nah, cheapest belt over here is at least 30 quid.

The more I read, it seems I have a 0.0001% chance that I haven't suffered damaged valves. That means head off, which means new head gasket at least. Add to that the cost of the valves themselves, there's no point even trying if a 2.5 engine is only 200 quid.
Before installing,change the bloody belt!
Youth is wasted on the young.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Fri Oct 28, 2011 6:03 am

daimlerman wrote:Before installing,change the bloody belt!
Bloody will this time :D
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Mon Oct 31, 2011 12:50 pm

Grrrmachine wrote:Basically, am I going to have to move the cam by hand as I test each cylinder?
There's no way your going to be able to perform a worthwhile compression test without a cam belt.

You could remove the plugs and use a dentist's mirror to look at the valves inside the cylinder, and it's worth taking the rocker cover off to look for broken rockers as they can break as the valve is pushed up by the piston.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there