Basically Ant is unavailable and my car needs to be mapped.
The story is as follows, the engine had been rebuilt and ants maf kit and ecu had been supplied. His EPROM had been giving issues so the car was taken to him and an ostrich emulator was supplied and the car ran fine. I took it to Europe the next day for 10 days. It had been spot on till the morning in a nurburg hotel car park the emulator lost it's files. So the car was recovered back and a working eprom was supplied whilst the ostrich was sent for investigation... I have been using this EPROM with no issues but feel as if it needs a tweak here and there. I am happy to buy an ostrich and supply it to whoever can help me.
The issue is ants maf data being workable by someone else if he never gets round to it.
I am also happy for someone to supply the base map for a similar setup and then get it tweaked by a mapper...
Engine specs:
525e block, crank, rods.
KS high comp pistons.
Lightened standard flywheel.
Crank rods pistons balanced lightened and shotpeened.
324td oil pump.
Decked block.
325i cylinder head
272 catcam.
Gasket ported exhaust ports.
Gasket ported inlet port and manifold ports.
New standard valve springs.
Bbtb.
R G M 20 manifold and scorpion centre and rear.
Lambda probe fitted.
Volvo maf kit.
Need mapping help.
Moderator: martauto
-
badassyas
- E30 Zone Regular

- Posts: 726
- Joined: Sun Aug 06, 2006 11:00 pm
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
I was also 'getting round to' some mapping from Ant on my 2.7, which unfortunately won't be done by him now.
I've been chatting to a guy at Circuit Motors (near castle comb) and have only heard good things about him, but he seems unsure about how to work the MAF conversion.
Might be worth giving him a bell though!!
(Can't find his number now so you'll have to google it!!!!!!!!!)
Was also chatting to Gunni (well, pm!) who seems highly regarded, but is a very busy man!!!!
Any other suggestions for us?????
I've been chatting to a guy at Circuit Motors (near castle comb) and have only heard good things about him, but he seems unsure about how to work the MAF conversion.
Might be worth giving him a bell though!!
(Can't find his number now so you'll have to google it!!!!!!!!!)
Was also chatting to Gunni (well, pm!) who seems highly regarded, but is a very busy man!!!!
Any other suggestions for us?????
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
Gunni
- E30 Zone Addict

- Posts: 2115
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Oxford
MY schedule should open up a bit in a few weeks time. I can handle your tuning requirements.
-
badassyas
- E30 Zone Regular

- Posts: 726
- Joined: Sun Aug 06, 2006 11:00 pm
Wicked!!!!!! Thanks ever so much. Please keep me posted. 
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
whats happened to Ant ? too busy?
-
badassyas
- E30 Zone Regular

- Posts: 726
- Joined: Sun Aug 06, 2006 11:00 pm
Well i ain't certain but I seen this and thought bugger...
http://www.e30zone.net/modules.php?name ... highlight=
http://www.e30zone.net/modules.php?name ... highlight=
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
This thread may assist Paul @ circuit motors with the MAF side of things:
http://www.e30clubsa.co.za/forum/index. ... -maf-swap/
http://www.e30clubsa.co.za/forum/index. ... -maf-swap/
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
-
Quaser
- E30 Zone Addict

- Posts: 2622
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: West London
Paul has done maf conversions, as he did mine!!
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
