fog lights
Moderator: martauto
-
wez201178
- E30 Zone Newbie

- Posts: 26
- Joined: Fri Jul 15, 2011 11:00 pm
- Location: market harborough
Wondering whether anyone can help me.I am having trouble with my fog lights on my e30.I just cant seem to get them too work.i would be grateful of any ideas!!!!!! cheers wez
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
1) What E30 have you got, and what year?
2) Did the car have fog lights when you bought it, or are you fitting them now yourself?
3) What have you done so far?
2) Did the car have fog lights when you bought it, or are you fitting them now yourself?
3) What have you done so far?
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
jimbob29
- E30 Zone Regular

- Posts: 266
- Joined: Tue Apr 26, 2011 11:00 pm
- Location: isle of wight
if bulbs are ok and the rears work take out the fog switch and plug in upside down then try might be the switch.
-
wez201178
- E30 Zone Newbie

- Posts: 26
- Joined: Fri Jul 15, 2011 11:00 pm
- Location: market harborough
Thanks for replying,i will explain in a little more detail. Its a 1989 320i,it already had fog lights.I have noticed that the rears don't work.Also there is no power going to the fronts,i have checked the bulbs they are fine.Fuses are fine.Any ideas???????Is it possible to wire the front and the rears to a single switch?
-
cypriot_boy_2k7
- E30 Zone Squatter

- Posts: 1641
- Joined: Mon Jan 29, 2007 11:00 pm
maybe the relay in fuse box matey give it a check
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
If neither work, I'll suspect the switch. Prise it out of its housing, and you should be able to pull out the switch from its connector.
The wires running to the switch should be Grey and Grey/blue for the front foglights, and Yellow/black and Grey/Violet for the rear foglights. By bridging those wires, you should make the lights work, telling you the fault is with the switch.
The wires running to the switch should be Grey and Grey/blue for the front foglights, and Yellow/black and Grey/Violet for the rear foglights. By bridging those wires, you should make the lights work, telling you the fault is with the switch.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
wez201178
- E30 Zone Newbie

- Posts: 26
- Joined: Fri Jul 15, 2011 11:00 pm
- Location: market harborough
hi there fella,yeah ive taken the switch out and the colors u say are exact,without sounding thick what u mean bridge? also when i took the lamps of and checked the bulbs they were ok,i checked the wires with a elec meter and there was no power to the fronts do u think it is still the switch?????????
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
By bridge I mean get another piece of wire (or a paperclip) and join the wire coming in to the wire coming out!
Turn everything off at the key, use the paperclip, turn on the headlights and then turn on the ignition for a few seconds. See if the foglamps glow or not. Turn off ignition.
Power gets to the lights through the switch, so if you've got not power to the fronts then yes, I'd still think it was the switch!
Turn everything off at the key, use the paperclip, turn on the headlights and then turn on the ignition for a few seconds. See if the foglamps glow or not. Turn off ignition.
Power gets to the lights through the switch, so if you've got not power to the fronts then yes, I'd still think it was the switch!
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
wez201178
- E30 Zone Newbie

- Posts: 26
- Joined: Fri Jul 15, 2011 11:00 pm
- Location: market harborough
hi mate you are a fookin superstar dun it.cheers fella
-
wez201178
- E30 Zone Newbie

- Posts: 26
- Joined: Fri Jul 15, 2011 11:00 pm
- Location: market harborough
Oh and by the way do you know owt about front windscreen wiper jets as i cannot get mine mine to work.Its got water flowing through it,but u have 2 tee pieces that just seem to stop it working,checked for leaks...none and put pin in jets but wen all connected it just dont work,yet u can hear the motor and it eventually kind of pops the tubes of both tee pieces.
