Valve clearances

Need technical Q/A then you're in the right place

Moderator: martauto

chopper
E30 Zone Regular
E30 Zone Regular
Posts: 478
Joined: Sat Nov 28, 2009 11:00 pm

Post Sun Oct 23, 2011 5:18 pm

Hi can anyone tell me the valve clearances on a m20 head? It's an 2.5 auto, the mechanic has rebuilt the head and said he need to know what the clearances are before it gos back together, thanks in advance
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Sun Oct 23, 2011 5:22 pm

0.25mm with a cold engine.
chopper
E30 Zone Regular
E30 Zone Regular
Posts: 478
Joined: Sat Nov 28, 2009 11:00 pm

Post Sun Oct 23, 2011 6:02 pm

Thanks jim
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Oct 23, 2011 6:07 pm

If it's a plastic bumper 325i, the exhausts like to be set a bit wider. Many (myself included) have found that they idle better with the exhausts set to 12 thou as opposed to the 10 thou that BMW quote for inlets and exhausts. It may well be okay set at 10" all round, but bear it in mind. Always set the tappets with the head on the engine and bolted down. If you do them with the head on the bench, they will probably close up with the head bolted on.
chopper
E30 Zone Regular
E30 Zone Regular
Posts: 478
Joined: Sat Nov 28, 2009 11:00 pm

Post Sun Oct 23, 2011 6:56 pm

It's a chrome bumpered cabby, yea he's got the head bolted on just needs to set the valve before he can crack on