E36 hub setup

Need technical Q/A then you're in the right place

Moderator: martauto

mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Thu Oct 20, 2011 10:03 pm

hi all, i know this has been spoke about a few times but didnt have any luck with the search option so here we go again.

i understand that the E36 hubs etc are a direct bolt on mod with no extra parts required.
my question is with standard size E36 discs/calipers etc with abs being bolted onto a non abs car.. would this present a problem with brake lock-up? without looking at the size of the E36 brakes i would imagine that they are bigger? if so i would think that they have a lot more braking power.. making lockups easy with out the abs that it should have.. the only real reson for the swap is to open a lot more options for wheels.. not a lot of rims to my taste at 4x100 these days :(
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Thu Oct 20, 2011 10:11 pm

E36 M3 EVO hubs and wishbones is what you need, standard E36 stuff does not align the wheel correctly.

Also, IIRC E36 ABS is not compatible with E30 ABS :?:

The 'proper way' of doing it is by using E30 M3 stuff but lots of ££££'s

HTH
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Baurluvva
E30 Zone Camper
E30 Zone Camper
Posts: 1074
Joined: Mon May 01, 2006 11:00 pm
Location: Swindon Wilts

Post Thu Oct 20, 2011 10:18 pm

E36 abs can be spliced into e30 wiring so I have been led to believe.
(I am in the process of finishing my 5 stud swap with e36 bits)
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Thu Oct 20, 2011 10:25 pm

oh, i thought standard e36 setup would fit ok.. so being e36 m3 evo gear is needed.. sounds like ££££'s anyways. ive somewhat hit a stop sigh then :x
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Thu Oct 20, 2011 10:31 pm

No you need the EVO wishbones to get the wheel in the centre of the arch.

Although I think I have heard of Treehouse bushes/wishbones being used with standard E36 stuff :?:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Oct 20, 2011 10:45 pm

Everything you need to know is here:

http://www.e30zone.net/e30zonewiki/inde ... Conversion