Driveshaft probs.

Need technical Q/A then you're in the right place

Moderator: martauto

staley_turbo
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Tue Jan 19, 2010 11:00 pm
Location: Leicester

Post Fri Oct 07, 2011 2:14 pm

I thought my cv boot had gone, but on closer inspection it was fine. There was grease coming from this joint:

Image

I swapped it out for another shaft but the other side is now doing the same. Any suggestions?
staley_turbo
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Tue Jan 19, 2010 11:00 pm
Location: Leicester

Post Sat Oct 08, 2011 9:34 am

Is there some way to rebuild these?
staley_turbo
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Tue Jan 19, 2010 11:00 pm
Location: Leicester

Post Sat Oct 08, 2011 3:13 pm

Someone must have done this?
staley_turbo
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Tue Jan 19, 2010 11:00 pm
Location: Leicester

Post Tue Oct 18, 2011 3:20 pm

Im getting shafted with these!




:roll:
kitch
E30 Zone Regular
E30 Zone Regular
Posts: 878
Joined: Sat Nov 01, 2008 11:00 pm

Post Tue Oct 18, 2011 5:05 pm

http://www.e30zone.net/modules.php?name ... &start=325

Page 14 if it loads in the wrong place.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Oct 18, 2011 5:29 pm

If there is enough room I would cut it off and fit a standard CV boot
staley_turbo
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Tue Jan 19, 2010 11:00 pm
Location: Leicester

Post Tue Oct 18, 2011 6:00 pm

Looks like this end is crimped on. Repairing is not an option. I will have to buy some new ones then :(
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Oct 18, 2011 10:48 pm

I mean cut the steel crimped on bit off, then fit a bigger CV boot