E36 coilovers on an E30 316i?
Moderator: martauto
-
E30-player
- E30 Zone Newbie

- Posts: 45
- Joined: Sat Oct 01, 2011 11:00 pm
I was basically wondering if it is possible to use the E36 coilovers on the E30 316i ? I have been offered a pair but obviously not going to buy them if they don't fit ?
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
Yes and no
Yes if you are running e36 wishbones/hubs, basically 5 stud conversion
No if your still running e30 4 x 100.
However don't be afraid of doing a 5 stud conversion, it can be cheap and makes suspension options alot cheaper and with more choice/avalibilty of parts
Yes if you are running e36 wishbones/hubs, basically 5 stud conversion
No if your still running e30 4 x 100.
However don't be afraid of doing a 5 stud conversion, it can be cheap and makes suspension options alot cheaper and with more choice/avalibilty of parts
-
E30-player
- E30 Zone Newbie

- Posts: 45
- Joined: Sat Oct 01, 2011 11:00 pm
Hmm okay, how cheap do you reckon the E36 hubs conversion could be ? And I'm planning on skidding with this car on the tracks as I am just starting out would you think they would cope ?
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
E36 hubs? Theyd be fine, thats what I run on my drift car.
Well soon ill have some wishbones up for grabs, but if you search ebay you can pick up wishbones, hubs with calipers and rotors for sub £100 and your good to go then.
Everything simply bolts on when doing the conversion
Well soon ill have some wishbones up for grabs, but if you search ebay you can pick up wishbones, hubs with calipers and rotors for sub £100 and your good to go then.
Everything simply bolts on when doing the conversion
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
I was contemplating a 5 lug conversion purely to be able to fit the 15" e36 bottletops - very light & very cheap - probably a good option if you're drifting
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Really?? I spend plenty of time trawling and never have found them that cheap..Phill172 wrote:Well soon ill have some wishbones up for grabs, but if you search ebay you can pick up wishbones, hubs with calipers and rotors for sub £100 and your good to go then.
Everything simply bolts on when doing the conversion
It is the M3 Evo hubs/wishbones you need btw.
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
I managed to get wishbones for 99p on ebay, m3 evo ones, just really looking into listings that are badly written or titled and listings that end at silly times etc.
Google translate and ebay.de works well too

Google translate and ebay.de works well too
-
E30-player
- E30 Zone Newbie

- Posts: 45
- Joined: Sat Oct 01, 2011 11:00 pm
I've been told by some people they fit, and others they don't ? Getting pretty confused lol
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
Who has said that they dont?
They 100% do I guarantee it, have a look at my car!
Where are you located? If you near me you are more then welcome to have a look,
They 100% do I guarantee it, have a look at my car!
Where are you located? If you near me you are more then welcome to have a look,
-
E30-player
- E30 Zone Newbie

- Posts: 45
- Joined: Sat Oct 01, 2011 11:00 pm
Im from Northamptonshire ? A lot of people are saying the coilovers from the E36 will fit streight onto the E30 without mods ? but then some say they dont :/
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
Ah, fair bit of a mission then.
Well If you have a E30,
and fit....
E36 wishbones -Preferably E36 M3 Evo wishbones, however you can use Non M3 evo wishbones will still fit and work. If you have adjustable top mounts and eccentric bushes you can get the geometry set correctly/what works for you.
E36 Hubs/dics/calipers - These will bolt onto the wishbones and will give 5 x 120 pcd stud pattern.
E36 shocks or coilovers - These will bolt straight on, you will need to drill a new topmount hole in the turret, but other then that they will fit no problem.
E36 Topmounts - Adjustable or non adjustable they will all still fit. E30 topmounts wont as the strut size is bigger on a E36, you could use E30 topmounts but you would need to bore them out.
If you are still running E30 wishbones/hubs then no E36 coilovers wont fit. However if you do all of the above then you are sorted
The above conversion on the front can be done in less then an hour it is so simple and the gains are brilliant too.
Hope it helps
Well If you have a E30,
and fit....
E36 wishbones -Preferably E36 M3 Evo wishbones, however you can use Non M3 evo wishbones will still fit and work. If you have adjustable top mounts and eccentric bushes you can get the geometry set correctly/what works for you.
E36 Hubs/dics/calipers - These will bolt onto the wishbones and will give 5 x 120 pcd stud pattern.
E36 shocks or coilovers - These will bolt straight on, you will need to drill a new topmount hole in the turret, but other then that they will fit no problem.
E36 Topmounts - Adjustable or non adjustable they will all still fit. E30 topmounts wont as the strut size is bigger on a E36, you could use E30 topmounts but you would need to bore them out.
If you are still running E30 wishbones/hubs then no E36 coilovers wont fit. However if you do all of the above then you are sorted
The above conversion on the front can be done in less then an hour it is so simple and the gains are brilliant too.
Hope it helps
-
penton08
- E30 Zone Camper

- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
The RIGHT way to do it is.....
E36 m3 evo bottom arms
E36 m3 evo knuckles (with brakes)
E36 3.0l m3 offset lollipop bushes
E36 legs with e30 springs (coilovers are best to get the camber right)
E30 adjustable top mounts
This is the only way to make it drive right, Other options may "fit" but it wont be right. It is a expensive way to fit cheap coilovers imo.
E36 m3 evo bottom arms
E36 m3 evo knuckles (with brakes)
E36 3.0l m3 offset lollipop bushes
E36 legs with e30 springs (coilovers are best to get the camber right)
E30 adjustable top mounts
This is the only way to make it drive right, Other options may "fit" but it wont be right. It is a expensive way to fit cheap coilovers imo.
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
If running proper top mounts like rpm versions the additional castor can be dailed in along with the use of eccentric bushes.
Also I found e30 specific top mounts do not fit e36 (in my case hsd coilovers) shocks.
As I have said before ignoring the coilovers I did my conversion for sub £100, it really is blown out of proportion on here.
It also opens up better options for suspension for the e30 imo
I should also say I did all my work with a very reputable Motorsport prep company
Also I found e30 specific top mounts do not fit e36 (in my case hsd coilovers) shocks.
As I have said before ignoring the coilovers I did my conversion for sub £100, it really is blown out of proportion on here.
It also opens up better options for suspension for the e30 imo
I should also say I did all my work with a very reputable Motorsport prep company
-
penton08
- E30 Zone Camper

- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
penton08 wrote: Other options may "fit" but it wont be right.
RPM top mounts might get some of the castor back but the wheel will still be "set back" and the SAI will be miles off.

