Just realised that my alternator belt is rather slack and the alternator adjusted as far as it can go so i need to change it.
Apart from operating the fan, what else does is connect too? anything i need to be wary of before i replace it? (seems to be connected to another pulley at the bottom of the engine).
Alternator belt
Moderator: martauto
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Is this on your M10?
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The pulley "at the bottom of the engine" is the one that drives the belt!
To replace the alternator/pump belt you will first have to remove the air con belt, and then the power steering belt, if you have either of these fitted, as they also drive off of additional grooves in the bottom pulley, and the alternator belt is the inside one.
To replace the alternator/pump belt you will first have to remove the air con belt, and then the power steering belt, if you have either of these fitted, as they also drive off of additional grooves in the bottom pulley, and the alternator belt is the inside one.
-
m8782538
- E30 Zone Squatter

- Posts: 1550
- Joined: Mon Feb 07, 2011 11:00 pm
- Location: Swindon
M10 316i, no air con, no PAS, pov spec.
So it should be just the drive pulley, fan and alternator?
So it should be just the drive pulley, fan and alternator?
