drivers door hinge
Moderator: martauto
-
jimbob29
- E30 Zone Regular

- Posts: 266
- Joined: Tue Apr 26, 2011 11:00 pm
- Location: isle of wight
my door has a loud clunk when you open it past the bit were it sort of stops in the middle?just taking door card of and cant figure out whats causing it and i dont have the confidence to remove the door without messing it up.the door hasnt droped or anything either??
-
cougar
- E30 Zone Newbie

- Posts: 228
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: HEATHROW
-
badboye21
- E30 Zone Newbie

- Posts: 58
- Joined: Thu Jan 01, 2009 11:00 pm
if the door isn't catching anything as it open's (check it's not catching the wing) then i would put it down to the door stay mechanism this is the bar that sticks out of the door half way down and connects to the door pillar between the hinges. try greasing it up if that doesn't work it's not a big job to swap.
-
jimbob29
- E30 Zone Regular

- Posts: 266
- Joined: Tue Apr 26, 2011 11:00 pm
- Location: isle of wight
it was the door stay!it was bent and twisted.could this of happened if the door was opened to far?
-
E30_Crazy
- E30 Zone Regular

- Posts: 733
- Joined: Fri Mar 05, 2010 11:00 pm
- Location: Alaska, USA (Lived in Brandon, Suffolk)
Had the same problem on my moredoor 318. I ignored the sounds, and eventually one of the bolts by the bar that gaps the pillar and the door pulled through the metal of the door itself, and now it's a free-swinging door.... Then 2 weeks after buying my tech 1, it developed the same problem. I've just babied it so far, not opening it far enough to clunk. I also tried looking behind the door card, but mine is all metal behind the door card?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Your door is not "all metal" behind the door card. There is all the access needed for the very simple job of changing the door brake. Get stuck in!E30_Crazy wrote:Had the same problem on my moredoor 318. I ignored the sounds, and eventually one of the bolts by the bar that gaps the pillar and the door pulled through the metal of the door itself, and now it's a free-swinging door.... Then 2 weeks after buying my tech 1, it developed the same problem. I've just babied it so far, not opening it far enough to clunk. I also tried looking behind the door card, but mine is all metal behind the door card?
-
cougar
- E30 Zone Newbie

- Posts: 228
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: HEATHROW
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
BMW have plenty for around £20!
-
E30_Crazy
- E30 Zone Regular

- Posts: 733
- Joined: Fri Mar 05, 2010 11:00 pm
- Location: Alaska, USA (Lived in Brandon, Suffolk)
Are they universal? Needed for drivers door.cougar wrote:+1Your door is not "all metal" behind the door card. There is all the access needed for the very simple job of changing the door brake. Get stuck in!
have one £20 with free postage to u
-
badboye21
- E30 Zone Newbie

- Posts: 58
- Joined: Thu Jan 01, 2009 11:00 pm
think i have 1 you can have mate if you can cover post can't imagine it being much pm me your address and i'll box it up.
-
E30_Crazy
- E30 Zone Regular

- Posts: 733
- Joined: Fri Mar 05, 2010 11:00 pm
- Location: Alaska, USA (Lived in Brandon, Suffolk)
Cougar, Badboye21:
Thanks guys, I am working an option right now, and if it falls through, or doesn't work out right, I'll be in touch.
Thanks guys, I am working an option right now, and if it falls through, or doesn't work out right, I'll be in touch.

