Have an e30 m40 316i
Hello,
In any gear when accelerating and the revs go past 5,500 the car will stop accelerating and the engine won't be able to go past 5,500 revs. I will be pressing full throttle and it remains at 5500
This leads to a situation where if i'm in 4th gear and the engine gets to 5,500 revs and then i shift to 5th gear, the engine will splutter and not accelerate for about 4 second. After the 4 seconds of spluttering, the engine will shift and rev like normal
However, when in neutral i can rev the engine and it gets to around 6500.
I think i might have messed around with the big flat head screw on the AFM, although i feel this problem has been present since i got the car. I do feel the car is running rich as im only getting 25mph from it. Any idea on how to lean it out if this is possible?
it has had brand new new HT leads, distributor cap and rotor arm.
Thanks, any help appreciated.
316i m40
Moderator: martauto
-
darkchild
- E30 Zone Addict

- Posts: 2729
- Joined: Mon Feb 06, 2006 11:00 pm
- Location: Kingston 12
A refusal to rev past 5000rpm on M40 donks normally means your camshaft is knackered. 
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
ah ok, it rarely does rev past 5000 even when under loud...however it is rear of course.
You reckon the camshaft is on its way out then?
Is that why also when i shift after it struggles to get past 5000, it still struggles for a few more seconds?
CHeers for the help buddy
You reckon the camshaft is on its way out then?
CHeers for the help buddy
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Camshaft wear or otherwise needs to be checked first.
Only way to set the AFM bypass or pot. is with the car attached to a CO gauge, and then only after any other faults have been eliminated.
Only way to set the AFM bypass or pot. is with the car attached to a CO gauge, and then only after any other faults have been eliminated.
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
How can I check for cam wear?
Cheers
Cheers
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
does your engine sound like a skeleton wanking in a dust bin ?
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
it sounds tappetty
-
e30mtech
- E30 Zone Regular

- Posts: 430
- Joined: Wed Dec 05, 2007 11:00 pm
- Location: glenrothes, fife
just had a good giggle to myself there thats qualityAlex wrote:does your engine sound like a skeleton wanking in a dust bin ?
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Alex wrote:does your engine sound like a skeleton wanking in a dust bin ?
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
It's a good description!Jim320i wrote:Alex wrote:does your engine sound like a skeleton wanking in a dust bin ?Proper made me giggle.
Remove the rocker cover and baffle plate so that you can see the cam shaft,it's a long thing with lumpy bits on it.Run your finger nail over the lumpy bits,does your nail catch any ridges?
Youth is wasted on the young.
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
if i'am honest i read it ages ago on the zone, and it stuck in my mind as a perfect descriptionJim320i wrote:Alex wrote:does your engine sound like a skeleton wanking in a dust bin ?Proper made me giggle.
