Episoidal beam adjust for European driving

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
FEP
E30 Zone Regular
E30 Zone Regular
Posts: 309
Joined: Sat May 24, 2008 11:00 pm
Location: Hackney (of carriage fame) London

Post Wed Oct 05, 2011 9:43 pm

Am I right in thinking that episoidal headlight units are the same on a left and right hand drive car?

If that is the case is there any reason why I can't adjust the beam with a screwdriver, rather than sticking horrible beam adjusters on when driving in Europe.
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Wed Oct 05, 2011 9:46 pm

no reason. You loosen the three screws on the back of the dip beam headlight and rotate to the other end of the slots.
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Wed Oct 05, 2011 9:48 pm

You sure can adjust them :) on the back of the dipped beam units there will be three crosshead screws. Loosen these (they don't come right out), pull the back of the light rearwards and twist it to tilt the beam pattern from RHD to LHD settings, then re-tighten :) I usually do this while waiting for the ferry :)
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Wed Oct 05, 2011 9:49 pm

Beaten to it! :P
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Wed Oct 05, 2011 9:50 pm

Too slow ginger ninja!! :D
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
User avatar
FEP
E30 Zone Regular
E30 Zone Regular
Posts: 309
Joined: Sat May 24, 2008 11:00 pm
Location: Hackney (of carriage fame) London

Post Wed Oct 05, 2011 9:58 pm

5 minutes for two replies. This site's just not what it used to be winkeye

Muchos gracias chaps.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Oct 05, 2011 11:04 pm

There's a plastic tab in one of the slots that requires you to almost fully undo the three screws to be able to pull the light unit back far enough to clear this tab.
If you're going to do this regularly, then it's worth taking the lights out and trimming this tab down to almost nothing.
Must remember to change mine back soon - only been back six weeks!
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Oct 06, 2011 9:34 am

The three screws are 'captive',so you cannot lose them!

Your only problem is finding them,but practice helps.I usually end up taking the grilles off and pulling the light units out,I get odd looks on the quayside....
Youth is wasted on the young.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Oct 06, 2011 9:51 am

Screws are captive, but some aren't that easy to get a screwdriver onto, especially if you have ABS and/or intensive wash. Removing most of the tab means that you only need to unscrew them one turn each, instead of about six.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sat Oct 15, 2011 10:21 am

Neat tip that brian, i'll do that next time i've got access :)
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details