Diff help please...

Need technical Q/A then you're in the right place

Moderator: martauto

Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Sat Oct 01, 2011 12:42 am

Hi i wanted know.... Would a 3.64 diff (325i) non lsd fit into a 320i? Straight fit or any mods?

Thank u for the help....

Ajay
E30 Crazy!
Andy325i
E30 Zone Addict
E30 Zone Addict
Posts: 4052
Joined: Mon Jan 10, 2005 11:00 pm
Location: Avon

Post Sat Oct 01, 2011 1:05 am

Sure would, but would just make it slower to accelerate I guess. Better top end though :)
Image
M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Oct 01, 2011 1:35 am

Assuming that the 320i has a small case 4:1...65mph at 3000rpm

3:64 will give 73mph at 3000rpm.

If the 3:64 is a medium case diff(small one's have 6 bolts to hold the rear plate on,medium one's have 8)and has come from an E30,it will bolt straight in,BUT,(there's always a but!)the prop shaft will need shortening by about 13mm,this is easy,just slacken the collar nut close to the centre bearing and push the rear half of the shaft forward.Or use a big Birmingham spanner on the rear flange.....

When removing the diff,remember to unplug the speedo feed....
And if doing the job laid on your back,go back every 6 months and check the diff mounting bolts for tightness...
Youth is wasted on the young.