lumpy running and clutch bleeding

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
andy523
E30 Zone Newbie
E30 Zone Newbie
Posts: 154
Joined: Fri Aug 20, 2010 11:00 pm
Location: Craigavon, N.Ireland

Post Mon Sep 26, 2011 8:08 pm

i have just started up my 325 after working on it for a while (restoration) and the engine sounds and runs like its off a cylinder, any ideas and how can i check if it is off a cylinder.
new plugs, leads etc and no holes in intake elbow.

also i have bled the clutch but the pedal is going straight to the floor with no resistance, any ideas.

andy
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Sep 26, 2011 9:29 pm

Grope the exhaust manifold to find the cold outlet,that's the cylinder that's not playing...could it be an injector sulking?

Clutch...Have you swapped both master and slave cylinders? We seem to find that they fail in pairs.
Youth is wasted on the young.
User avatar
andy523
E30 Zone Newbie
E30 Zone Newbie
Posts: 154
Joined: Fri Aug 20, 2010 11:00 pm
Location: Craigavon, N.Ireland

Post Mon Sep 26, 2011 9:42 pm

will try the manifold idea and the clutch was fine apart from from the master cylinder leaking so it was replaced, should i change the slave just in case, although it was bleeding okay
User avatar
spbt1
E30 Zone Newbie
E30 Zone Newbie
Posts: 235
Joined: Wed Oct 08, 2008 11:00 pm

Post Tue Sep 27, 2011 4:00 pm

I am no expert but i too had the same running lumpy issue and found that the exhaust valve on no.2 cylinder was not closing properly, after setting the all the tappets the problem went away.

I was also informed that it is always best to change both master and slave cylinder on the clutch and ensure that all the old fluid is removed/flushed out as perished rubber in the fluid will quickly foul the new cylinders.
Image
User avatar
andy523
E30 Zone Newbie
E30 Zone Newbie
Posts: 154
Joined: Fri Aug 20, 2010 11:00 pm
Location: Craigavon, N.Ireland

Post Wed Sep 28, 2011 8:50 am

no 6 spark plug was the problem, running okay now.
Think i will change the slave cylinder on the clutch, its still the same.

thanks