318is springs onto a 320i?

Need technical Q/A then you're in the right place

Moderator: martauto

tha881
E30 Zone Regular
E30 Zone Regular
Posts: 780
Joined: Thu Apr 15, 2010 11:00 pm
Location: Kent

Post Mon Sep 26, 2011 4:40 pm

Can i fit 318is springs on a 320i? Ive been told that the front will sit too low as they are meant for a 4cylinder engined car. Ive also been told they are m-tech and same as on 325i sport??

Was going to fit these but not sure now! Anyone got any info or pics of a car thats had this done??
320iAN
E30 Zone Camper
E30 Zone Camper
Posts: 1395
Joined: Sat Sep 16, 2006 11:00 pm
Location: West Scotland

Post Mon Sep 26, 2011 4:54 pm

320i is heavier than an iS.. spring rating is different so if you were to fit the front spring's to your 320i it would look lower and may feel softer?
both 318iS & 320i model's use the same front diameter shock's & rear spring's will be fine on both iS and 320i

also i'm 99% sure that 318iS did come standard with slightly lower suspension/spring's than other 4 pot's
Image
tha881
E30 Zone Regular
E30 Zone Regular
Posts: 780
Joined: Thu Apr 15, 2010 11:00 pm
Location: Kent

Post Mon Sep 26, 2011 5:13 pm

I read somewhere that the 318is uses m-tech springs, has a 15mm drop and is a bit stiffer compared to standard suspension. Thats what i was after so bought them thinking they would be alright. Didnt think about the weight difference at the time is it really going to make much difference?
320iAN
E30 Zone Camper
E30 Zone Camper
Posts: 1395
Joined: Sat Sep 16, 2006 11:00 pm
Location: West Scotland

Post Mon Sep 26, 2011 5:36 pm

i couldn't say what kind of difference they would honestly make but the 318iS is quite a bit lighter.. might be worth fitting them and see how it goes? (unless you get a more positive answer)
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Mon Sep 26, 2011 5:46 pm

Dont 320i`s use 46mm struts(unless fitted with ABS)?
318is is 51mm.
I might be wrong but worth checking for sure.
Image
tha881
E30 Zone Regular
E30 Zone Regular
Posts: 780
Joined: Thu Apr 15, 2010 11:00 pm
Location: Kent

Post Mon Sep 26, 2011 6:06 pm

Yeah i have the smaller struts but i thought this is only an issue in regards to the shocks??
Topblag
Old Skooler
Old Skooler
Posts: 7095
Joined: Wed Jul 30, 2008 11:00 pm
Location: Fife - You got a problem with that ?

Post Mon Sep 26, 2011 6:07 pm

eko wrote:Dont 320i`s use 46mm struts(unless fitted with ABS)?
318is is 51mm.
I might be wrong but worth checking for sure.
that's my understanding. On that basis shocks won't fit both cars. Also, don't think 318is front springs are the same as 325 Sport springs, main difference being the weight of the engine the springs are dealing with. Drop may be the same but spring characteristics are different.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
asmith88
E30 Zone Addict
E30 Zone Addict
Posts: 2684
Joined: Sat Aug 23, 2008 11:00 pm
Location: Co Down, N.I

Post Mon Sep 26, 2011 7:46 pm

i always thought that all 6 pots and the 318is had 51mm struts,

as above the springs will fit, but wont be designed for the same weight so will sit a bit lower
1990 brilliant red 318 is
nickphine
E30 Zone Regular
E30 Zone Regular
Posts: 282
Joined: Sun Dec 03, 2006 11:00 pm
Location: Kendal

Post Mon Sep 26, 2011 8:20 pm

I've got 318is springs fitted to my M20 engined 328i and it sits too high (for some tastes) I do have alloy top mounts on though which may add a little. But my reckoning is that the M42 is not as light as is often assumed and the M20 not as heavy. Plus my car has been lightened quite a bit. But like you say the springs may not fit on the 46 mm struts, if they do though weight wise I can say it should work as I do it on mine.

cheers

Nick Hine
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Mon Sep 26, 2011 9:22 pm

I used to think iS springs were specific to one model but a quick search on realOEM shows not.

Part 31331130043 (COIL SPRING) was found on the following vehicles:

E30: Details on E30
E30 320i Touring, Europe
E30 316i 4 doors, Europe
E30 316i 2 doors, Europe
E30 318i 4 doors, Europe
E30 318i 2 doors, Europe
E30 318is 2 doors, Europe
E30 M3 2 doors, Europe
E30 320i 2 doors, Europe
E30 320i 4 doors, Europe
E30 323i 2 doors, Europe
E30 323i 4 doors, Europe
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth

Post Tue Sep 27, 2011 12:16 pm

Fit them, different original model won't make a fks bit of difference in the real world. Twenty years hard or light use will have changed the original lb/in spec from what it was as the tension in the coil won't be the same after twenty years use. Even things like -60, -40 etc are pretty pointless as we are not all the same weight, can drive round with a fuel tank nearly full or running on fumes, do or don't carry passengers, have different amounts of crap kicking around in the boot etc etc etc .....
For sale - E30 320i racer project - sold.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Sep 27, 2011 2:42 pm

DHFiS wrote:I used to think iS springs were specific to one model but a quick search on realOEM shows not.

Part 31331130043 (COIL SPRING) was found on the following vehicles:

E30: Details on E30
E30 320i Touring, Europe
E30 316i 4 doors, Europe
E30 316i 2 doors, Europe
E30 318i 4 doors, Europe
E30 318i 2 doors, Europe
E30 318is 2 doors, Europe
E30 M3 2 doors, Europe
E30 320i 2 doors, Europe
E30 320i 4 doors, Europe
E30 323i 2 doors, Europe
E30 323i 4 doors, Europe
As can be seen from this, there is some cross model usage of particular springs,but it's not as simple as the above may suggest.
It may be that this spring is used on a manual 320 and also on a 318i auto with aircon.
In may also be fitted to the iS only for the Norwegian market.
You need to go into the ETK in more detail, checking each model individually to see what you actually have and what it should be fitted on.
tha881
E30 Zone Regular
E30 Zone Regular
Posts: 780
Joined: Thu Apr 15, 2010 11:00 pm
Location: Kent

Post Tue Sep 27, 2011 9:16 pm

Thanks for that info will probably just go ahead and fit them. Got some new b4s to go on the front but not got the rears yet, but can fit them later as separate to the spring.

So you could choose sport suspension as an optional extra on any e30 when buying new? If it was a saloon then would have that spring regardless, unless it was a 325 judging by the list.

And if they were on the m3 then they cant be a bad spring, i hope!

Checked the manual and there is only 35 kg difference between a 318is and a 320i
tha881
E30 Zone Regular
E30 Zone Regular
Posts: 780
Joined: Thu Apr 15, 2010 11:00 pm
Location: Kent

Post Sun Nov 20, 2011 6:39 pm

I have now had the 318is springs fitted to my 320i. There was some debate because these had com from a 4cyl car but i went ahead and used them, and here is the result

Image

Along with new bilstein b4 shocks and top mounts all round its a massive improvement. The car stays planted and reacts quicker to steering inputs. It dampens better and the suspension travel is less